Recent content by ntbruncie

Bronze looks really good with the Cactus Grey

I have not had any issues like this so far. I’ve been running mine for over a month now.

Yes, there will be one on each side of the hitch. One to the left one to the right side tail lights.

Those of you interested in replacing your factory fog lights with a set of SignatureLux bi beam leds here is a few pictures of how well they work. Things to note: To turn the fog lights between high beam and low beam. You need to turn the fogs off and then turn the fogs on. Then to go back to...

I went with a set of SigLux on my xlt and am very happy with them. In the low beam setting they have a nice sharp cut off lines so you are not blinding other drivers and high beam setting is a nice option for back roads. The only downside side I would note is that occasionally when I start the...

Look at the outsides of the hitch, on each side you will find the harness and a plug. They are directly under where the tail lights sit.

Yes I did tap into the reverse light wire for the bar. Sorry I didn’t high light that wire on the diagram.

Yes I am.

Hopefully your fog lights come in correct. I order a set of yellow for my xlt and when they arrived the box did say yellow but after installing them I found out they were white. I let signaturelux know and they are supposed to send me the correct lights that was roughly 2 weeks ago and I haven’t...

it’s an Opt7 triple row with amber turn signals. Yes the turn signal wires are ran to each tail light harness and hard wired in.

No, the access hole to lover the spare is next to the license plate.

I know a bunch of people have wanted to do this on their rangers but with out a plug and play option out there it’s difficult. If you use the 4 wire plug at the hitch the truck freaks out and thinks a trailer is attached, gives faults for trailer tail lights not working and disables the blind...

You came from a full-size pick up to a midsize pick up and think the interior is too small yet you want to go to a smaller pick up??? Please make that make sense.

The harness comes straight from the BCM. I would run a relay and power.

If you look down by the hitch on the outer side of it you will see a harness you can tap in there. The harness leading up to the tail lights it’s not going to help you, all the wires are black.