Search results

I posted some a couple posts above this one.

I think it was, it was fairly close sitting at ride height and didn't want to chance it. Toyo AT III

Here are a couple. 1" strut top spacer.

I"m running 35x11.50 on the stock wheels with a 1" lift in the front. No rubbing. Rear crash bars and mudflaps in place, and front crash bars removed.

FTL5212. Everything seems fine with the angles but I wasn't really concerned about them either, as there are several similar spacers on the market with the same lift height. Alignment was within specs as well.

I'm running the Fabtech 1.5" Bronco front spacers. Got about 1" of lift.

Mine takes a while for the level to come up after shutting down. Manual states to wait 15 minutes for an accurate reading. If I wait long enough the 7 qt recommended fill only reads a little above 1/2 on the dipstick.

Looks like you pressed the limit button on the left side of the steering wheel, which means the truck won't go over 20. Press it again and it should turn off and to back to normal.