Search results

The changes you need to make in forscan are contained in the spreadsheet linked on page one.

Interesting that’s not a default function on an Australian ranger raptor, hitting the side button on the shifter puts it into manual mode.

I’m interested to know if you have got oil pressure to work. That’s the one I haven’t got going. what vehicle do you have? I don’t have the selected gear showing either on the bottom left side

Here it is, obviously cutting of the grill was necessary, but that was easy. You can see how deep the Onyx is. Performance wise I’ve had BD lights for over 10 years now and definitely wouldn’t choose anything else.

A 30 would fit if you mounted the same way I did but in either case I made a custom bracket to suit. Neither would fit behind the grill because the BD lights have such large heats sinks on them and as it was I had to “tweak” a few plastic parts to make them fit. They work amazing and no loss of...

I opted to put a 20inch onyx+ Baja design in the grill and two XL80 ditch lights. I dropped the grill light as low as possible to reduce blockage on the radiators

Yeah seems bizarre but when I added tyre temperature incorrectly, I lost the gear display at the same time as gaining the tyre temperature. Out of curiosity have you added the tyre temperature function via forscan?

I should have been a little clearer - there is some Australian spreadsheets getting around that state it should be changed to number “9” and not the +8. The OP may have done that and stopped the gearshift display from working.

I managed to do this a year or so ago and iI think it happened when I added the tyre temperature. The value below should be "A" not "9" for raptor, 9 seems to work for other variants. TPMS - Display tire temperature in addition to tire pressure IPC 720-11-01 xxxx-*xxx-xxxx Change value of * to 9

I haven’t but I would very much like to have the selected gear on display over just showing D (drive). Keep us posted if you test any further

Ok I figured it out. I needed to force the gauges to alphanumeric then all the gauges showed up correctly. Still would love to get engine pressure.

Thanks for the heads up. I tried doing that and had a mix of good and bad results Fuel has changed to, 0 and 1 instead of E and F, I managed to get transmission temperature to work though. Do you know what you specifically changed?

No - that’s already done. See highlighted area the small numbers under the gauges is what I want to add.

Has anyone tried to turn the little number values for the displayed small gauges. Underneath the fuel gauge it shows DTE. I’d like to also see oil pressure, coolant temperature etc.? i have seen it turned on but I don’t know what forscan function it is.