Search results

Has anyone done this on the non Raptor Ranger? How did you mount the brackets? Im thinking 2-4 lights below the horizontal veilance / emblem. I figure I'd need to cut out a portion of the grill for the brackets at least. Would love to see any examples of lights or a light bar. Ive seen...

I just got the Turbosmart Dual Port BOV (TS-0223-1096) and was going to install it, but the instructions have me confused. I already emailed Turbosmart but its been a few days and I haven't heard back yet so hoping someone here can help. The instructions reference a flat part on the mounting...

Not really "Ford Specific", but I know a lot of others use various distribution boxes, so I figure I would ask... Say Im using a distribution box (Auxbeam) to control various aux lights. Use two pairs of lights (four total lights) as an example. Each of the light pairs draws about 6-8 amps...

What is the preferred product or method to shield longer external power runs? Im considering running power to an on board compressor behind the rear wheel, or to aux lighting on the rear bumper and would need to run power from under the hood (I don't have OEM aux switches). Will run a low...

Who makes the best value ditch light brackets for the Ranger / RR? Ive seen some from SDHQ, Rigid and FSE that are really expensive, and then other cheapies from Amazon or Ebay. Ive also heard of some that have fitment issues or don't allow the hood to fully open (which is a nonstarter). What...

Im planning to wire up a couple of ditch lights that have a secondary DRL feature. Im in a Ranger that does NOT have Aux switches. Ideally I would like the DRL feature in the aux lights to run with the OEM running lights in the headlights (without having to switch) and will use a switch to...

Need some mud flaps for my non Raptor Ranger. I'm running +25 offset, so the wheels are just slightly beyond flush. Consensus seems to be for the Muslogy and OEM flaps, but they seem to work better for a tucked wheel setup and I would like a bit more extended coverage. I also prefer something...

Im considering some upgrades to boost power, but also want to make sure that power increases are matched with corresponding upgrades to make sure that I maintain reliability. Is there any consensus around the order of upgrades and what is needed to support those upgrades? Im going to start...

Not even sure the feature is practical for me, but out of curiosity, I tested the lane assist feature a few times and it doesn't seem to work. Turned the feature on with the button and it didn't work. Tried again while using cruise control and didn't work there either. When I turn it on...

Has anyone mounted the Putco virtual blade 8” Drl lights in the mid grille (beside the emblem) on a non Raptor Ranger? Seems like they would fit well. If so, how did you power them? Pics? Considering these against the standard grille lights.

I just installed a Memphis Nano subwoofer behind the rear seat in my 2024 xlt. I have no experience with a job like this but did a bunch of research beforehand and it turned out great and really improved the sound. My goal was to fill out the bass on the stock system - not looking to rattle my...

Ive seen different opinions on this. Is anyone able to confirm the color of the wheel arches and bumper trim on the 2024 Ranger with fx4? Is it magnetic gray or boulder gray or something else?

If I need to disconnect the battery on my XLT 2.3, what will reset and what memory information will I lose? I would think it would be good to go once its reconnected, but Ive read mixed things about this and want to prepare for any settings resets. Thanks

Has anyone installed this grill on the US Ranger? https://www.signaturelux.com.au/products/phamtomlux-front-grille-upgrade-ford-ranger-everest-led-front-grille-2022-2025?variant=49742538703165 Curious to see pics and confirm whether there are any quirks integrating into a US Ranger.

I think I already know the answer, but has anyone endeavored to try the ebay molle panels from carpart2021 seller? I'm sure this is a buy nice or buy twice purchase, but maybe someone has taken the plunge and can tell me they were pleasantly surprised with these? Or are they junk like I'm...

I'd like to install an on board ARB compressor on my non raptor ranger with (ideally) an aux switch and hose quick connect on the bed panel. Seems like the three common mounting points are (1) under bonnet, (2) behind rear seat and (3) behind the bed panel. Trying to get input on pros and cons...

I know people have installed the Kicker Hideaway HS8 in the rear seatback area, but has anyone installed the HS10? The price is similar and the size is almost the same, but want to make confirm the HS10 fits. How tight is the fit on the HS8? For those of you who have installed the either of...

What color is the painted bumper and wheel arch trim? Carbon (m7) or magnetic (j7) gray? Can’t find a definitive answer anywhere. Thanks!

I took off the stock decals and want to replace them with dark gray FX4 decals on my truck. Tons of options out there that say they are Ranger decals, but they are all 14". My stock decals were 10.25" and I want to stick with the OEM size. Anyone know where I can find a smaller one? Ive...

Anyone black out the lower bumper trim (metallic color on the fx4)? If so how did you do it? Feel like vinyl would be easy but will get beat to sh!t, but maybe someone who’s done it can confirm? Paint? Is there a replacement part available? Rest of the truck is pretty blacked out and this...