Search results

The 35s were nearly warn out at 50K miles , so time for new tread...wife loves the color matched raised lettering. Far quieter than the Nittos. Snagged 37x12.50r17 Kenda Klevers. Still only lifted 1.6" front and 1.2" rear with top hat strut puck spacers.

Hello all, I have both the ranger Raptors and a 21 Bronco...I decided to install the 700HP Predator 5.2 supercharged V8 from a F150 Raptor R into the Bronco. took six weeks but its a success! hers a video of the first start... since the Ranger and the Bronco are of such similar architecture and...

Hello I'm reaching out to all of the overseas Ranger Raptor owners. I need some help isolating the part number off of a transfer case off of the non-usa version Ranger. Specifically those that came with the 10r80 transmission when mated to the all-wheel drive transfer case that includes the goat...

https://www.motortrend.com/news/ford-in-vehicle-advertising-patent/

you hear it here 1st! the broncos fuel tank mounts on the passenger side, opposite as ranger...so it's feasible to add the broncos OEM tank for a EPA legal twin tank option. the Bronco has 2 sizes available and the correct shaped rear to clear suspension arms...I'll be happy to install one...

Installed a 1.75" spacer in front and 1.25" in rear. leveled the rake out ALOT. total lift is 2.375" front and 1.5" rear. very happy with the results.

Swooped up some bronco Sasquatch wheels and swapped on 35s... needed to removed the crash bars and trim 1" off the rear on front inner fenderlip. stuffed the suspension and NO rubbing. funny how the f150 Raptor owners look puzzled now as we cruise by.

I picked up a set of Jumbo Heavy Duty tie rods from RC for pur Ranger Raptor. They are way bigger and stronger than the puny OEM tie rods that snap. RC unit are forged steel. These have grease zerk fittings at both ends! And a quality boot. The best part is even though these were designed for...

BFG AT KO3s 285/70/17 with less than 3,000 miles on Ranger Raptor wheels. $1500

I will be updating this post in a few weeks with instructions on how to install the heavy duty 3.0 steering rack on Ranger raptors. I was the first guy to ever do this with the Bronco and came up with the "rack hack" programming features Everyone used for the upgrade. The bronco raptor...

Specifically I am wanting pictures of the inside of the steering knuckle or upright...and the lower control arm, where it mounts to the knuckle. UCA and knuckle part numbers too please.