Search results

Bought it through Ford website using my points. There's 2, 1 for BLIS and 1 for Non-BLIS. I purchased for BLIS.

Yes, on my 2026 and it was a pain lol.

Mine came with generic Spanish only instructions that after translation still was terrible lol. In the 2026 Ranger Raptor. 1. Removed the bolts to the back seat so I could slide it forward. 2. Pulled back the driver side door seal and removed the seat belt and C trim pillar. 3. Unbolted the...

If you ever just want to punish yourself, install a Putco light bar lol. It says easy plug and play system. Take my word for it, it's anything but easy and not plug and play. I've installed the Amber DRLs, Vent lights, grille lights, and a 30" dual function light bar behind the grille and the...

Yes, but just to 1 side. The other side you have to stretch across but I ran it under the plastic cover. There's no wires near anything moving. You wouldn't notice the wires either unless I pointed them out. Which you still would only see about an 1-2 inches then. You could buy two harnesses to...

Sorry, I was talking about the light bar. The grill lights and fender lights I have tapped into the side marker lights using a wire harness from F150LED so they'll function together. Original I had them hooked to aux 1. I bought the grill lights from F150 leds with the thought if I didn't like...

It looks better in person without the camera adding the extra glow. It was surprisingly easy to install behind the grill, took me about an hour, no drilling or cutting needed. It's dual light with the Amber being a DRL then there's a white high beam as well I use for driving on the beach at...

Thank you. I did the side vents a month ago.

Looks good! I did mine a few weeks ago. This week I added a 30" behind the grill light bar.

I just installed these yesterday and your well laid out instructions were great. I did not remove the tires and just turned them in towards the engine on the side I was working on. I started with the driver's side since I kept hearing it was the easier of the 2 sides and took my time and did a...

That's a great idea, a little goes a long ways and it on sale all the time from what I've seen.

It wasn't bad at all. I washed it with Adams graphene shampoo and then dried immediately. I did the sandwich bag trick to check my paint for rough spots to see if Clay bar was needed. The truck is still pretty new so I didn't need to clay bar. I then wiped down with Surface Prep. After that I...

I live in the Florida panhandle where the weather changes minute to minute. I thought about doing a ceramic coating on my Raptor but backed out. Someone told me to try Ethos Resist and man it did not disappoint. Anyone else used this product before?

I installed a taillight light bar and had to access the 3rd brake light wiring harness. I wonder if I can still install one of these or would I have to use p-taps in place of plugs since I'm using them for my light bar

It was an absolutely ridiculous install because of the BLIS/Trailer system. Seriously misleading lol. The one thing they say that you can take to the bank is that they do not refund lol.

I called, emailed, and did chat with them. All I had was generic instructions in all Spanish. Adhesive was missing, adhesive promotor was missing, had different size clips. They kept referring me to Ford saying it was OEM, and Ford referred me back to them.

Mine on my 2026 Raptor Ranger are faux vents completely sealed. There's a plastic welded clip on the backside that I removed so I could install the lights into the pocket that removing the clip allowed me to create. No airflow could exchange through these.

Thank you. Sorry, meant to say, "are you talking about these vents". Autocorrect got me again lol

Thank you. I got them from F150LEDS. Really nice lights, I took that photo during the day and you can see them pretty well. As far as the ones on the hood, I have not seen lights for those yet. I've had my RR for about 3 weeks now.

I did and I wouldn't recommend it. I got the Putco blade BLIS. I had to lower my headliner to gain access to the 3rd brake wiring harness. I had to remove c-pillars, amp, woofer, and unbolt the back seat. Once I gained access to the harness the Putco "plug and play" did not match up causing me...