F150LEDs Ranger Raptor Build Thread

[Fawnbuster]

Was cleaning mine the other day and guess where all the sand sits....right in that opening

Guess you'll need to get er up to hyper speed and blow er out

Sponsored

 

[Sauce]

Smoked Side Markers
Smoked third brake light
Grill light mounts (Raptor and non Raptor)
Puddle Lights that clear running boards
Fog lights that can switch from clear to yellow (is that possible?)
Tinted grill lights - the current ones are too white/yellow. Would be nice if they blended in when they were off.

I tinted my f150leds grill lights. They were very visible when off and looked out of place. I tested the tint when lit vs untinted and it’s almost imperceptible. Here they are off. I tried to take photos on but my iPhone captures the led strobe and it doesnt look like all the lights are on.

Also, the quick connect harness didn’t work for me. I’m not sure if it’s for an older vintage Ranger or what but the two plugs for the light are much bigger than the quick connect. There is a connector off the the side that is the same size and might be connected to the harness (although it’s not in the back of the light) and I tried it but got zero activation. I used positaps and tapped the headlight drl wires and it works nicely.

 

[Sauce]

Photo took when it got dark

 

[F150LEDsMatt]

Yes it does , between the bumper and the driving/fog light. I was watching a thread and saw the head on view, open on the back. And thought hmmmmm

I'll send the feedback over!

 

[Fawnbuster]

I saw that you sell an led bulb for our RR front fender flare marker lights, any upgrades coming to replace that whole amber light with a cob led smoked housing?

 

[F150LEDsMatt]

I tinted my f150leds grill lights. They were very visible when off and looked out of place. I tested the tint when lit vs untinted and it’s almost imperceptible. Here they are off. I tried to take photos on but my iPhone captures the led strobe and it doesnt look like all the lights are on.

Also, the quick connect harness didn’t work for me. I’m not sure if it’s for an older vintage Ranger or what but the two plugs for the light are much bigger than the quick connect. There is a connector off the the side that is the same size and might be connected to the harness (although it’s not in the back of the light) and I tried it but got zero activation. I used positaps and tapped the headlight drl wires and it works nicely.

Hey @Sauce the tint looks awesome. Blends right in. In reference to the plug and play kit I do know that the polarity on the 24' Ranger Models is reversed. This could be the culprit. Could you message me directly so I can help get this issue cleared up for you?

 

[Sauce]

Hey @Sauce the tint looks awesome. Blends right in. In reference to the plug and play kit I do know that the polarity on the 24' Ranger Models is reversed. This could be the culprit. Could you message me directly so I can help get this issue cleared up for you?

Not the polarity. The plugs on the back of the lights are much bigger than the plug and play harness that I got.

 

[schwartzki]

pic below is of our prototype flush units that are coming very soon! Stay Tuned!

Do you have a ETA on when the flush units will be order-able?

 

[Fawnbuster]

Do you have a ETA on when the flush units will be order-able?
[/QUOTE

I second that motion!

Sponsored