Search results

Sorry man, I fixed the link. The errors you are seeing are a result of having to do the relearn on some other modules, I think. Check the link now.

Does anyone know of any way to get a trigger for the high beams? It is can bus so can't find a 12V wire to tap into for a relay. I have a Lariat, so no Aux switch to tap into either. Does anyone know if there is a can bus module available for the Lariats?

Does anyone know, or have some diagram on which spare fuse locations are ignition switched? I need one that is 30 amp to wire in my light bar.

Update: The high beam wire does not provide 12 V. I think it is somewhere to pick up a signal to some processor to send 12V so you can't use for a trigger wire for a relay. Since the fog light turn off with the high beams, I am tapping into the fog light to pin 87a on a 5 pin relay. I now need...

I followed the procedure in this post. You do exactly what they say and it work perfectly. You simply change the size in millimeters on the tire size setting in the BdyCM in Forscan. Forscan forum tire size change instructions.

Update: In order to install the light bar, you need to trim some from the back of the grill or you can't install the grill back in. I am going to order a new Raptor like grill instead. The high beams trigger wire is located behind the lower driver's side kick panel. It is a wire that literally...

No issue with suspension articulation, the tires don't hit anything up high. I did got with 17x9 RTR wheel with a 0 mm offset. The lift is a simple spacer lift Superlift 2024 Ranger spacer lift . Can't find any specific real lifts for the Ranger, but apparently the Bilstein 5100s fit, so I am...

I put on 305/70/17 Nitto Ridge Grapplers on and was 5 MPH off at 60 MPH. I used forscan, changed the to the correct mm and then did the PCM relearn. It worked perfectly. I read somewhere that it worked on the Raptor, but not sure about the Lariat, Well it worked like a charm and no codes or...

Do you have a link to them? Also, how do the lights wire in, like to where?

What did you use for springs, the stock ones?

For the sway bar links, I got new ones that came with the level kit for the 2024. 2024 Ranger levelling kit with sway bar links Maybe you can ask them if they can sell just the links. Also, do you have a link to the front and (presumably separate) rears that you purchased?

I got a light bar for the Ranger Raptor from Altiq in AU. It fits fine in the normal ranger behind the grill, but the wiring kit is designed for the Raptor with the Aux switches. I know the Auz 5 and 6 on the Raptor only go on with the high beams. As you may know, there are no AUX switched in...

Does anyone know if Forscan works with regular Rangers? I need to recal my speedo for larger tires. What other way can I do this?

I have heard that Ford has locked down the ECU to the point where you can't create custom tunes or any tunes for it. Can someone confirm this? If this is true, what a crock!

I agree that it is a good system. I will probably do the water bottle trick. There should be logic in there that sees the road is straight and doesn't do that. I would imaging they could fix it with an update if they wanted to, but in this country where we desperately need tort reform they need...

Honestly, don’t notice a difference in acceleration or anything. It’s still accelerates fine and rides awesome. The only thing I did notice is two MPG drop.

Yeah, I know. The problem is that is a pain in the ass. I have to wiggle the wheel constantly and sometimes I am on a road that is perfectly straight for 10's of miles. Sure is a pain in the ass.

Anyone else have this issue where when using lane centering and cruise I get asked to hold the wheel when I am holding the wheel on a straight road. It is really annoying. I am driving on a perfectly straight road and am holding the wheel, but there is really no need for input as the truck is...

Installed 2.5 inch levelling kit and 305/70/17 Ridge Grapplers on RTR 17x9 0 offset wheels. Only had to remove the crash bars and cut an inch off where the mudflaps would go. Anyone know how to do a speedo recal? Does Forscan work on 2024 Rangers yet?

I ordered some in the same size with 17x9 o offset wheels. Will be installing this week with a 2.5 inch front space lift. I will post some pics. As for the speedo, did you need to recalibrate?