Search results

The link is not pulling up on Etsy for me.

I figured out what I was doing wrong, so 2/4 doors done. Just have the front doors to add the Thinsulate to.

I need to see if they do stuff on the side as well. I have enough sound deadener and Thinsulate sm600L left over from doing the doors to handle the headliner as well.

If you're going to do the doors as well, you should try to knock those out yourself. It's super easy and after doing the first door it took me about 30 minutes per door.

Did any of y'all use Thinsulate insulation in the door panels, to compliment the deadening material?

Just fixed it. How thick are the bars and how wide is the tray you had highlighted in blue?

How thick are the bars and how wide is the tray you had highlighted in blue?

I'm running a Bak X4S rolling cover. I posted some pics and measurements earlier in the thread with the Shelter Green Raptor.

How well do they match the amber grill lights that Signuture Lux sells? I have the 4x amber lights from them that snap into the grill.

That looks pretty good! I wish that the Ranger had split rear seats though (40/60), that way I could permanently have a storage area and still be able to keep the 3rd seat.

I bought a 2025 in July. Do I need to schedule it for this year or can I do it next year?

I was thinking of something more like this where the tray recessed down, but I guess it's sitting on top would work as well. The idea would be that I would have plenty of space for bulky light items related to canoeing and then if there is an option for spacers to bring it to full roof height...

How long of a tray can you make and do you have any designs that go fore to aft? For my usage, I would want to put a cross bar at the front and back connection spots, and then have a tray that goes from fore to aft down the middle for storing canoe paddles and life jackets. I would then...

If it would be helpful, I can take some pictures and measurements for you of the rails and seals after I'm done with work today.

I'm more than happy to help. I assume that the plan is for them to mount in the same way as the shorter ones that are already available right?

If you come up with some designs and can send me a template I can print out, I can cut out and build a cardboard vertical section for rough fitment if that would be helpful at all. For the BAK X4S, I also have an idea to that I can write up later for how to handle the side rails. I'm thinking of...

A riser is what I was referring to for raising it up to roof level for Canoes. My Canoes are 16.5' and 19', so I need to be able to clear the roof. For whitewater kayaks, I assume that any height will work over the bed, since they would only stick out a few feet out the back. One thing I...

I measured my Bak 4XS when it is rolled up and in the process of being rolled up. When I roll mine up it is not a perfect circle and peaks at 8" tall. By the time it is fully rolled up, it is a little over 7". If full height bars are off the table, I'd want bars that are 10" on the bottom of...

I haven't been able to find the number of Watts even. It was in a brochure from B&O for the gen5 ranger.

I've searched on the internet and browsed through these forums and have yet to be able to find the power specs for the B&O amplifier, that comes on the 2025 Ranger Raptor. I was able to find the specs for the previous B&O system in the last generation Ranger, but I doubt it's the same as the...