Search results

I suspect you'll be fine. I've only seen two other forum members (there may be others I missed) running 35x11.50 -- @Franco and @modified_rraptor -- I believe one of them removed the OEM crash bars completely and the other is running the high clearance ones. I got the idea to run 11.50s from them.

Possibly, but depends on a few factors, including the offset of your wheels, and how hard you're planning to offroad it. Also, just like any other tire size, not all 35x11.50s are the same size -- the width of the new KO3 in this size is not yet listed, and it's listed at 34.5" tall, so if...

These are confirmed to fit the RR: https://www.readylift.com/high-clearance-anti-intrusion-beams-ford-ranger-2wd-4wd-2019-2023.html

Thanks, will do. All driving has been in Normal mode.

These are the ones I got, which are confirmed to fit the Ranger Raptor. I have not definitively confirmed they fit the non-Raptor 2024-25: https://www.readylift.com/high-clearance-anti-intrusion-beams-ford-ranger-2wd-4wd-2019-2023.html

Sorry, I should've included that detail. Falken Wildpeak RT01 35x11.50R17 on RRW wheels 17x8.5" with +25 offset. No rubbing at all, lock to lock, and no trimming required. I did install the ReadyLift high clearance crash bars.

Had the Hyperco coils installed today on my Ranger Raptor. 2.25" in the front and 1" regular (non-HD) in the rear. I've only driven them 15 miles or so on the freeway and side streets, but so far I'm impressed with the ride quality. I don't notice it being much stiffer or more rigid, if at...

Today I had Hyperco coil springs installed -- 2.25" in the front and 1" (non-HD) in the rear -- and mounted my 35x11.50R17 Falken Wildpeak RT01 on RRW wheels in 17x8.5 with +25 offset. Very happy with how it turned out. No rubbing at all lock to lock, with plenty of clearance for the type of...

I am having Hyperco coils installed front and rear (regular, not HD) next week. Texas Motorworx in Dallas (one of the largest and most prominent/reputable Raptor shops) has done a few sets on the RR and will be installing mine. Will post of up pics and feedback after I get them on. Also doing...

Sure thing, will post pics here. Had a delay on delivery of my coil springs so they are now being installed next Thursday. I had never seen this tire in person (in any size) before ordering them, and was slightly concerned the 11.50 might look narrow, but I am very pleased with the aggressive...

Not installed yet, but got my Falken Wildpeak RT01 in 35x11.50R17 mounted on my Relations Race Wheels matte bronze RR7-H, matte bronze in +25. Leveling springs will be installed on the Ranger later this week, and these will be mounted up.

First, let me address your baseless personal accusations against me. I have never had any affiliation, relationship, arrangement or otherwise with Goose Tunes. I have never communicated with him other than directly in connection with the tune of my two F-150 Raptors. I am not in the tuning...

I'm not sure what "beneath you" means, so again, I would encourage those in the market for a tune to do their research, specifically, in this context, Goose Tunes. I've personally not seen, read about or heard of any engine, transmission or other issue/problem that was attributed to Goose's...

For those of you who are criticizing Goose Tunes, I would strongly encourage you to go to fordraptorforum.com and read the literally hundreds of pages of universally positive reviews and information regarding Winfield and his Raptor tuning on the Gen 2 and Gen 3. I have never seen a single...

Thanks for this feedback. Yes, having had three F-150 Raptors I'm familiar with AT vs. RT vs. MT, and am currently running 37" BFG KM3s on my 2022 - they have around 25K miles on them and are starting to get fairly loud, which doesn't really bother me. The reviews on the Wildpeak RT suggest...

Thoughts on the Wildpeak RT so far? Assume they are very quiet when brand new, and you probably don't have much driving in wet/rain yet. I am very likely going to do the RTs in 35x11.5 when my RRW wheels arrive in May. I'm in Texas so don't need the 3PMSF.

Thanks very much for posting this. Extremely helpful; this is exactly what I'll be doing.

@Franco love the bumper bar and LP6s. I'm really taking alot of inspiration from your build. How much, if any, do the LP6s block the front camera?

Thanks for posting the update. Looks great! Super beefy. Like you, I'm not worried about a little trimming.

Man it looks awesome. I like how the width of the 315s fill out the wheelwell and the poke is perfect. I’m doing the same level and same wheel/offset so just have to decide on 315s or 35x11.5. Do you have any rub, especially behind front tire on inside of wheelwell when full lock in reverse...