Search results

I’m trying to avoid going to dealer to order a part for my 2025 RR. At the opposite end of the rubber hose that connects to waste gate is a L shaped plastic pipe with a gasket and ring around it that connects into the air charge hose. I broke the ring and it comes loose, have it Frankensteined...

Finally got my side rail inserts I ordered on eBay 2 months ago. I like them. They are subtle and can’t see them from a distance. Puddle light shines through it as advertised, small but something unique.

Yes. Every single day after I wipe off all the bugs collected from driving to and from work in an OCD ferver.

I found a solution. Cut 2 small rectangular pieces of .5mm shim and painted black, stuck them to red 3M tape and put under rail where the clip for the top latches under. Was the perfect thickness. Holds tight now and can’t see what I added at all.

Any tips for installing. I installed mine a few weeks ago and it isn’t tight when I close it especially in the back, I can move it up and down. There is a gap between the clip on the cover and side rail where it clips under. I have reinstalled the rails multiple times and the ribbed clamps that...

Yep. It was a PIA. It was easy to remove the old, but the new is what took so long. Tight spaces and hard to reach to get everything adjusted and tightened just right. 32 hose clamps to tighten with a 7mm socket. One of the rubber sleeves that went to the larger turbo had a manufacturing defect...

That’s not what my American 24-25 Ranger Raptor truck bed looks like OEM.

Also, if you want the first R in the RR backward, cut it out of the sticker for the left side and right side and then switch them after you put the rest of the full sticker on each side. Tedious, but should work just fine.

Etsy. Here is the link: https://www.etsy.com/listing/1790096718/raptor-ranger-fp-performance-decal?ref=yr_purchases

I just installed my Lowmax Stance cover this morning. I opted for the carbon fiber version. I about did a double take when I pulled it out of the box. It was way lighter even than I expected and super strong. Very pleased. I had a BAK Revolver X4TS and hated it. It leaked and was built too...

I noticed recently on a 500 mile trip, when I kept it under 70mph my mpg would start to go up. I’m averaging 17.5, but on that trip I was at 18.4. I’ve only ran Top Tier 93 since I purchased the RR. Wish I could get to 24mpg, I have a 1hr commute each way 5 days a week.

I’ve seen my exact setup before and after on the dyno both with tune and there was a HP increase after the pipes and intercooler. Very minimal, like a couple HP but still something. I’m more concerned with keeping the power. Tightening my leaking pipes is what gave me all the power that was...

Have done a whole lot of upgrades recently, this week alone on a week off, over 50 hrs into working on the Ranger Raptor. Intercooler pipes, charge pipes, intercooler, FP tune, resonator deletes , new BOV and the list hours on and on. All that and performance has been just Meh. Haven’t really...

After your post I went back to CVF’s website to look again if there were any instructions, there weren’t, but all the customer reviews with pictures don’t have a grille shutter installed. I am a little concerned with there being no protection for the intercooler now on the highway, but I haven’t...

I have no idea what the metal frame is for, I didn’t use it. Bronco I assume since the intercooler works with both, but I could be wrong. Came with zero instructions, not even a QR code to get instructions. The active shutter I removed and I didn’t replace. There is some space in the front but...

I just installed a CVF intercooler yesterday. I didn’t need to remove the bumper or grill. When you’re done find a spot to zip tie the motor for the shutters. FYI, I wouldn’t recommend running the zip tie through the hole for the motor either, use the bolt hole. I originally did that and the...

Upgraded the intercooler to one from CVF and while I was at it put on these front recovery hooks from Reno. The thread for the install of the hooks is here: https://www.ranger6g.com/forum/posts/293071/ post #9.

Here’s a better picture.

I installed an intercooler from CVF today and while I had the tow hooks off I looked into if I could install the F150 tow hooks from Reno I purchased. They don’t fit, but the mounting holes are spot on. I decided to do some modification. I cut the tow hooks off at the welds to remove them from...