Search results

Both Lane centring and lane keeping will give the warning if no steering wheel movement is detected, and is not a " squeeze ". I disabled Lane centring altogether since it wants to ride off center, close to the middle line at all times. Dealer re calibrated the camera but it didn't help on my...

87 minimum requirement as per owners manual is all i use

Got mine $2500 below up here in Canada

If it was "normal", mine would be doing it too, but it's not. Stick your head under there and locate the noise.

Nice write up! Just installed mine couple days ago same way with one exception. I have the fuse taps facing the other way. The outside leg of the tap should be on the hot side, which is to right side of all the fuses i tested. Power gets to both fuses directly instead of having to run through...

Getting it to pair with my Chamberlain opener was quick and painless compared to previous Fords i had, and that's about it. It's the worst by far to get it to work from outside and have to use the Chaimberlain remote clipped to the visor. Works good when leaving from inside the garage. That...

What i thought was lane keeping that consistently keeps me closer to the left line, to the point where oncoming traffic moves to their right, was actually the lane centering doing this. I disabled centering and all is well. Not working well in my RR at all.

Might do that to keep windshield clear in the rain when humidity is 100% just like the head lights come on too when wipers are working. In the past, even with AC off, it would kick in as soon as Defrost is selected, regardless of temperature (down to 25F only), which was to aid for the same...

Had to disable Lane centring since it consistently wants to be closer to the center line than the right line, not center at all. Oncoming traffic moves to their right a bit regularly. Dealer re-calibrated the camera without success.

Chip on driver side here. Seems to be a chronic issue at the Michigan Assembly Plant

The card with instructions were in my glove compartment and do work. The card on the fuse box behind the panel in the drivers footwell has a different 5 digit code from the one in the glove compartment and does NOT work. Used to be easy to retrieve key codes for the pads that are hardwired...