So after you have them installed can you cycle the high beams and see what the fog lights do for us?
The way it is described, every time the high beams come on the fog lights will turn off as per usual but this will cause the fog lights to change their settings when the low beams come back on...
This brings up the same questions as the other thread on these lights.
Will they cycle through there settings every time they are turned off via high beam or will they retain their last setting?
Presumably you can deactivate the high beam shut off via Forscan but still, cycling through intensities with each power cycle is a big inconvenience.
I saved the link so I will send my questions to them directly and see their response.
The website does appear to take all forms of payment...
Apparently he registered and made a post about these lights and it was deleted right as I was typing a reply.
I had the following questions based on that thread.
The thread did have a link to a website.
Do you have a picture of the wiring harness?
It seems this may have similar circuitry that a...
I have no problem with mine. They are not sliders and not intended to be. they absolutely cover everything that needs to be protected.
How thick are the RA covers? Can't tell from the pictures.
Or there are these.
https://buckleupoffroad.com/products/buckle-up-off-road-trailing-arm-sensor-protector-and-skid-plate-for-2024-ford-ranger-raptor-set-of-2-made-in-usa
I run 93 octane and have run map three but I'm running map 2 in sport and map 1 in all other modes.
What does your A/F mix look like? I find that mine is always at or below 14.7 which is good but I wonder if I should turn up the bias a bit. I really haven't explored the settings on this like I...
I'm using the output from the Mobridge to control the sub The DSP does such a good job controlling it. As of now I'm using the high power output going to the amp but when I do the final wiring I'll use the low power output. I believe the DSP will have better control of the sub channel that way...
The blue wire is a remote on for another amp. I used it to power on a powered sub woofer.
The sub in the U.S. versions is really small and I had an unused Kicker 11HS8 that fits perfect in the factory spot.
There is a difference in wiring in the U.S. versus ROW versions of the trucks so I'm...