Search results

I have the end cap type and if you reach down from above on the right side you can fit it on. I had to buy one because my old truck had easy access and I used the strap type. If it wasn't 12 degrees out and the middle of the week I'd get a pic for everyone with the cap wrench on.

I changed my oil filter from the top just lean over the engine and use a cap filter on a socket wench. Can't remember if I needed a 3" extension or not but it was less than a minute to loosen.

I'd like to know this as well and would install one if it will fit. Following...

https://www.ranger6g.com/forum/threads/hood-latch-fix-official-tsb-fix-added.12952/ This is the video that I used to adjust mine. Super easy. Adjusting the stoppers on the hood itself wasn't enough.

I'll check again. I agree it is a nice feature to have and was looking forward to it after torturing myself watching video reviews while waiting for it to be built. I don't have the tech package with cameras either. EDIT - Checked the whole menu system and nothing about windows. It can be...

It is not every single 6g Ranger. I have an XLT and it does not have this feature. Might be Lariat/Raptor level or maybe in the tech package.

I bought a stubby and sadly found the reception much worse than the stock antenna when testing in a parking lot. I am sure it depends on where you live and how flat of an area you have. I ended up putting the stock back on.

Close... China

I know but I like the feature for when there is an object on either side when reversing that I can't see by looking backwards. I just wish it could not think I am driving into the ground LOL

I have the same issue as others with the steep driveway. It will warning beep at the bottom if I go super slow but if I am going the speed I would with ever other vehicle I have used it has applied the brakes a few times and annoyed the hell out of me. The only way I know to stop it from...

I hit 101 on my non-raptor 2.3L XLT after break in miles just because I like to say I went that fast with each vehicle I own. Wasn't at that speed more than 10 seconds but it wasn't struggling. 107 for a Raptor would seem low for actual "top speed" given the engine is much better but as...

Definitely show them the TSB for the hood latch. https://www.ranger6g.com/forum/threads/hood-latch-fix-official-tsb-fix-added.12952/ I tried adjusting the bump stops on the hood only but it was still hard to close so I raised the latch up about 1/8" and now I can lower the hood down and just...

My plate is mounted flush with the BOTTOM of the bumper so it is above and blocking some of the grill. Yours looks like it is the opposite and flush with the top of the bumper sticking down. I don't have a front camera or the adaptive cruise and emergency braking so I can't comment on the...

I received mine about 48 hours after deliver also. Already spent a bulk of them on all weather floormats.

I just checked my truck that I picked up 5 days ago and it has the white piece you are asking about on the driver side. It's out of reach but looks like that old thin foam that they use for packing or to make those giant airplanes out of lol I can't tell if it is attached or not would need to...

I'm finally picking up my XLT tomorrow. I did a walk check around it but didn't immediately notice the door alignment but I will for sure look at it when I go back in the afternoon before taking it off the lot. Will let you know

I found the manual on Helm but they only have it available to print in French. I'm in agreement with everyone else that Ford should provide the print manual for the vehicle especially when the entire vehicle system is digital and if there is no power there is no manual.

This was asked recently on another post. Read the horror stories here: https://www.ranger6g.com/forum/threads/current-production-wait-times.11244/

My order date was early February was told then "15 weeks" and it is now 22 weeks and my build date keeps getting pushed out now to 8/6 so if that actually sticks it will be 6 months just to start the build. Agree with earlier post to find one on a lot if possible. At this stage you might want to...

From my reading on the forums over all the time I have had waiting the plant is closed for the first 2 weeks of July but they should be back working on 7/15 which is before my OG build date of 7/22. The only think I can think of that would cause the moves are parts shortage or not having the...