Search results

Hi Great job and helpful post. Would you give some more details about how you mounted cameras to side mirrors? I did installed the oem 360 cam system by replacing the ipma and connecting front and side cameras, and everything works fine. Currently my side cams are strapped in footwell waiting...

Changing cluster requires programming and this programming is not only VIN change and drive modes. There are other settings to be programmed depending on vehicle features. And to know the vehicle features, you need to check the asbuilt values, and to check the asbuilt values, you need the VIN...

How do people know what setting a block contains? I mean how do they know the name like “SensorCfg_DPAC_Homography3 (SCDPACH) "? Where do they find it?

Today I had the chance to try the camera as well but unfortunately no success and only blue screen. I suspect wiring to IPMA from front camera is not installed.

@Stumpm2 would you share your VIN as private message? I am trying to activate the Trail Control feature and it would be helpful to see the values on raptor asbuilt since raptor had trail control feature.

Trail Turn Assist on my Wildtrak, here is how: Changes are needed in APIM and ABS module; APIM 7D0-10-02 was 0000 00A2 00–, changed it to 0000 00A5 00–. This adds TTA button to offroad screen. ABS 760-03-01 was E87C 56–, changed it to E87C D6–. This enables the TTA on ABS module. After the...

Trail Turn Assist can be activated by changing settings on APIM and ABS module via Forscan.

This the IPMA location:

I’ve downloaded the pages related with IPMA location from workshop manual when i had access for a couple hours. Will share it later today. You may also check following link, it is for F150 but still very helpful because wiring is very similar even though the location of IPMA is different...

I am trying to achieve the same options. Will be receiving grill jumper wiring and front camera in a couple days and will see if I get the same problem. I suspect that jumper wire to pass the firewall and wiring to the IPMA might might not been installed. I didn’t check it yet but options to...

This is the TCU fuse location:

Finally I found the location of TCU module on Next-Gen Ranger Wildtrak. It is located behind the Sync 4 Screen (Center Display Unit) and not easy to access: Memo

I didn't add DRL option yet but I tried other options like enabling drive modes, approach detection etc. and they worked. May be it is not related to this topic but currently I focused on trying to fix an issue with connected vehicle features which are not visible on my SYNC Connectivity...

Hi, I assume function for DRL control is not available as default because I've also don't have the function for DRLs on my Wildtrak. I think first you need to enable the setting for DRL control via Forscan either at APIM module for SYNC or at IPC module for Cluster. Then you can control the...

Thanks for clarification. ?

I will try to unplug the connectors and monitor the warnings or errors that might come up.

I found below module or component behind the rear seat on the passenger side. I am not sure if it is TCU or ACM or something else.

Hi, I am trying to find the location of TCU module on Next-Gen Wildtrak. I checked behind the glovebox area but there I only saw BCM module. Can someone with access to workshop manual help? thx. Memo