Sponsored

Drain Holes/ Leaking Tonnneu Cover/ Drop in Bedliner

coolsp2

Member
First Name
Jason
Joined
Nov 23, 2024
Threads
6
Messages
13
Reaction score
2
Location
uSA
Vehicle(s)
2204 Ranger
Hello everyone. I have the gator efx hard trifold cover. Every time it rains, my bed is totally wet at all 4 corners and all along the sides of the bed. I used silicone sealant to seal all the corners as well as drilled two holes in the front of the cab where the two plugs are for the water drain hoses. However, I see that all the water is going underneath the drop in bed liners and I can see it seeping out. I don't know where the water is exactly leaking from outside the cover but it's pretty bad, like puddles of water on both sides. If I can't fix this leak, I am thinking of drilling two holes under near the bedliners to drain the water out the bottom of the cab. Are there drain plug locations near the bottom of the can I can drill? Does anyone have any experience with this cover and sealing leaks? Thanks

IMG_4664.jpeg


IMG_4663.jpeg


IMG_4659.jpeg


IMG_4658.jpeg


IMG_4662.jpeg
Sponsored

 

Truckin

Well-Known Member
Joined
Dec 3, 2024
Threads
11
Messages
232
Reaction score
293
Location
Not far enough away from Chicago
Vehicle(s)
24 Ranger
Two ways I know to find out. In daylight get inside and close the lid. Look for daylight and seal it.
or
Get inside and have someone hose it down, if that don’t work a car wash with high power rinse.
 

Deleted member 8469

Hello everyone. I have the gator efx hard trifold cover. Every time it rains, my bed is totally wet at all 4 corners and all along the sides of the bed. I used silicone sealant to seal all the corners as well as drilled two holes in the front of the cab where the two plugs are for the water drain hoses. However, I see that all the water is going underneath the drop in bed liners and I can see it seeping out. I don't know where the water is exactly leaking from outside the cover but it's pretty bad, like puddles of water on both sides. If I can't fix this leak, I am thinking of drilling two holes under near the bedliners to drain the water out the bottom of the cab. Are there drain plug locations near the bottom of the can I can drill? Does anyone have any experience with this cover and sealing leaks? Thanks

IMG_4664.jpeg


IMG_4663.jpeg


IMG_4659.jpeg


IMG_4658.jpeg


IMG_4662.jpeg
The plastic bed side caps leak
 
 







Top