More Light Without the Bulky Look: 2024+ Ranger 30" PRO

[MandRonline]

Hey Ranger6G,

For anyone looking to add some serious nighttime visibility to their 2024+ Ford Ranger without putting a bulky light bar on the outside of the truck, we wanted to share our 30" PRO Light Bar Kit.

This setup was designed specifically for the Ranger and mounts cleanly behind the grille using factory openings and hardware. You get a low-profile, integrated appearance during the day and considerably more usable light when you're hitting trails or back roads after dark.

A few highlights:

• Fits 2024–2026 Ford Ranger XL, STX, XLT & Lariat without the front grille camera
• Curved 30" PRO LED Light Bar
• Spot + driving beam pattern for a combination of distance and width
• Advanced TIR optics for greater efficiency and reduced glare
• Bolt-on installation with no cutting or drilling
• No need to fully remove the grille
• Doesn't interfere with radiator airflow
• Choice of White + Amber DRL or Yellow + Amber DRL
• IP68 rated with an upgraded aluminum housing
• Vehicle-specific brackets and mounting hardware included
• Backed by a lifetime warranty
• Designed for off-road use

Want to see what the PRO bar actually looks like once the sun goes down? Check out the light output demo below for a look at the beam pattern and real-world nighttime performance.



If anyone here has questions about fitment, installation, wiring, or choosing between the white and yellow PRO options, feel free to ask. We're always happy to help!

Sponsored

 

[el_sabio]

Only fits grills without the front camera. You didn't mention that in your propaganda.

 

[NevadaBob]

Only fits grills without the front camera. You didn't mention that in your propaganda.

It says that now, but I'd think that would automatically exclude the Lariat. I think they all have the front camera.

 

[MandRonline]

Quick bump for anyone checking out our 2024+ Ford Ranger 30" PRO Light Bar Kit.

For those interested in seeing what the installation involves, we also have a full install video walking through the setup. The 30" PRO mounts cleanly behind the grille for a hidden, factory-style appearance while adding serious usable lighting for trails and back roads after dark.

The kit is designed specifically for the Ranger and provides a clean, bolt-on installation with no cutting or drilling required.



If anyone has questions about installation, fitment, wiring, or the different PRO lighting options, feel free to ask. We're always happy to help!

 

[NevadaBob]

Quick bump for anyone checking out our 2024+ Ford Ranger 30" PRO Light Bar Kit.

For those interested in seeing what the installation involves, we also have a full install video walking through the setup. The 30" PRO mounts cleanly behind the grille for a hidden, factory-style appearance while adding serious usable lighting for trails and back roads after dark.

The kit is designed specifically for the Ranger and provides a clean, bolt-on installation with no cutting or drilling required.



If anyone has questions about installation, fitment, wiring, or the different PRO lighting options, feel free to ask. We're always happy to help!

@MandRonline Can you address the question of whether it really works with a Lariat? The original post says it fits "...and Lairat without the front grill camera". I'm not sure there exists a Lariat without the front grill camera, unless you remove it yourself to put the light bar on.

 

[MandRonline]

Only fits grills without the front camera. You didn't mention that in your propaganda.

It’s mentioned on our website page for this product.

This light bar only fits Ford Ranger trims without front grille camera

 

[NevadaBob]

So it fits XL, STX, XLT, and Lariat. Except for Lariat.

 

[MandRonline]

So it fits XL, STX, XLT, and Lariat. Except for Lariat.

Thanks for pointing that out. To clarify, the 30" PRO kit requires a Ranger without the front grille camera. Since the Lariat is equipped with the front camera, this kit would not be compatible with the standard Lariat configuration. We’ll update the fitment information to make that clearer.

 

[NevadaBob]

Just messing with you. I would love to be able to put that on my truck.

 

[MandRonline]

Just messing with you. I would love to be able to put that on my truck.

All good! We may have to get creative.

 

[Dr. TJG DVM]

Just messing with you. I would love to be able to put that on my truck.

It only took about 3 pokes before they caught on, maybe you should have been more blunt

 

[Dr. TJG DVM]

All joking aside- really nice product, looks phenomenal!

 

[GritzNGravy]

I installed the 30" PRO light bar on my ranger over a month ago. Im very happy with it. It looks good and is very bright. The install was super easy, and I used their wireless switch harness also. I forgot to use the 10% forum discount code on checkout and M&R were awesome and gave me the discount after I messaged them here.

 

[NevadaBob]

That looks really cool.

Sponsored