Recent content by Bluestra1n

How’s the fit at the transition between the headliner and plastic trim?

The fix is to raise the wheel up and then lower your seating position so that the steering wheel blocks your view of the shroud. Then you can’t tell it’s crooked😂

Happened to me once when I was stopped on a hill and making a left turn. It was one of those intersections were if you don’t go for it, you’ll never get out. I gave it moderate gas and it hesitated. I had oncoming traffic getting closer and closer so kept giving it more gas until it finally came...

Yea there is play when I undo the clamp. I did what you did which is get the wheel where you want it and then put pressure on the shroud to get it straight as possible before re-engaging the clamp. It gets the shroud closer to level by doing that, but it’s never as “flat” as it should be.

you're SOL. I noticed this after the first month when i got my 25 and it bugged the hell out of me. I took the plastic shroud around the column off and the steering column support is tack welded to a metal bracket behind the wheel. There's no way to adjust it other than cutting that tack and...

huh. I just checked my vin and all I have is the seat bolts recall open. I don’t know why the shop said I had a PCM recall open when I scheduled the inspection last week. I know there was a Body control module recall that was resolved OTA a couple months ago, but I don’t think I ever got a...

https://www.ranger6g.com/forum/threads/26e04-pcm-update-wiped-my-ford-performance-procal-tune-2024-ranger-raptor-%E2%80%94-anyone-else.31630/ I know in this thread they are talking about Raptors, but when I called a shop to set up my annual inspection, they told me I also have a recall that...

FYI for guys with Livernois tunes: Below is guidance from Livernois on how to handle the PCM recall.

I was missing steel rivets on my 25 xlt. Got a dealer to install them at no charge when I was in for another recall. At least for a non-raptor, they are the only steel rivets in the fender. Everything else is scrivits or push clips. The part is called a “wheel house liner rivet”. Could be a...

Sorry, Sold

I’ve never done person to person transactions on PayPal, but I think I can. I have a PayPal account but it’s not a business account.

$50 for a 4DTech auto stop start eliminator. Buyer pay shipping. Installed on truck less than a year, removing because I got a tune that disables the auto stop start and no longer need a separate device to do it.

Jig saw go Brrrrrrrr. I have a non fx4 and just grabbed a new oem front skid for a good price and didnt want the front air dam breaking up the lines of the truck. I looked at basically getting all the Fx4 plastics, but it would be at least $100 for the two side spoilers and i still couldn't...

It’s strange they didnt record your front caster. There should be an oem spec for that.

I think if you get an fx4, you have to use the screen, because where the locker button would be is now the big off-road button to the left of the the 4 wheel shifter. If you don’t get the fx4, but get the rear locker as an add-on, you get a physical locker button and not the off-road physical...