Recent content by Ragner

Hi Ramiro, Zone lighting is activated here in Australia from factory. Do you mean welcome lighting? If so mine was easily activated via the spreadsheet inputs.

Try turning the steering wheel straight. What you are noticing is probably the cornering lights. I doubt your fog lights would be switched on.

I've maintained HDC but only via the soft button on the off road screen. I've tried lots of combinations to get it in conjunction with the HDC hard switch but nothing has worked. I've tried both F6 and D6 and D6 was the better option if I recall.

Actually now I remember, TTA will not work if you have hard switch input for HDC. You have to add D6 which means you will no longer have hill decent control working from the switch panel but you can still activate it from the off road screen. Does that make sense?

D4 is the correct value for your truck. Not sure why it would not be engaging..

Here is how I got my rear view camera to work at speed. IPMA 706-02-02 xxxF CExx xx-- APIM 7D0-01-01 xxxx xxxx Fx-- APIM 7D0-01-02 Axxx xxxx xx-- APIM 7D0-01-04 xxxx FCxx xx-- APIM 7D0-02-02 xxx3 xxxx xx--

TTA required reading the G-sheet section of the spreadsheet and changing the 760-03-01 xxxx XXxx to suit. I can help of you give me your exact original block code.

What is your original as-built for ABS 760-03-01?

These are the off-road guages. The trans temp and and boost pressure will work but the oil pressure will only work with petrol variants. I've tried every combination for my diesel but cannot get the oil pressure gauge to work.

Seems to only be petrol variants that have the oil pressure capabilities..

Yo superj, does your oil pressure gauge work? I've tried to programme mine in my 3.0 V6 but it never goes above 0psi. What engine is in your ranger?? Regards.

There is something called "India overspeed warning".. tried that?

I deleted my last comments as you should just be able to go to the IPC non-as built and disable *Chimes - Traffic Sign Recognition Overspeed* It may not work if it's due to regulations in your country though.

It's been a long time since I did it but I'm pretty sure it was IPC - minor guage units - change temperature units from alphabetical to numerical. Pretty sure it was non-as-built. 🤙