Search results

Those look great! Offset looks perfect!

Looks like that worked out really well! Thanks for sharing the photos. If anyone is interested, I could build a version of the bracket that has a similar layout, even angle the outside bracket down slightly to provide more ground coverage. That's the reason for the modular design on this bracket.

Great. Thanks for the business!

You definitely could, but the comms hole is slightly too large for the S2 mounting bolt, so you would need to put a fender washer on the bottom. We have a driver and passenger comms option. You could do both and that would get you what you're after.

There are 2 bolts on each side of the seat that attach it to the truck. Remove those, push the seat belts through the crack, and you're good to remove the seat. With two people, you can do it in just a couple of minutes. We're working on a video of the whole process to go from seat installed to...

Yesterday, Willys (our 2-year-old Boxer and full-time chaos coordinator) got his first ride in the Ranger with our Rear Seat Delete installed. I tossed in a rectangular dog bed, and it actually stayed put really well — even without the Mil-Spec coating. Of course, if your pup is anything like...

We'll absolutely handle that. Actually, you could do that now with our BASE system. The floor rails have our dogbone cutouts in them. You could put in L-track single stud connectors and ratchet strap the tire on top of the BASE rails. We could definitely build a simple tray that bridges the gap...

Absolutely! This one is going to get more attention, so it's first. 🤣 But, that's coming as well. We may even make a version that puts the tire at a slight angle so we can put the jack and impact below the front end of the tire.

Thanks! I'm not familiar with those specific boxes. Pelican stuff, absolutely, but for external storage boxes, we lean toward ROAM Boxes. They have some nice quick-release brackets that we use pretty often.

We have so many products on the site, it's hard to keep everything related. That's the problem with having 2200 SKU's. 🤣🤣 We are pretty good at validating orders to make sure everything is compatible, but the CS team probably didn't realize you were wanting to mount it to the panels. I think...

Oh shoot. Wish I had known you wanted to do that. We have a solution already - https://americanadventurelab.com/product/overhead-molle-fire-extinguisher-mount/ The fire extinguisher mounts use different bolt spacing than we can do with the MOLLE panels and stay on pattern. So, the plate above...

Each of those jacks has its benefits. Bottle jacks are great at shoving into small spaces to bend things back where were in the past. 🤣 We'll work on a bottle jack mount as well.

Absolutely! I'm working on a mount for the 1.5T Pro Eagle jack right now, but a bottle jack would be nice as well.

Ha ha. That's good to hear, kinda. Sorry you're having trouble with the truck. I don't hear that often, so hopefully you can get it sorted soon. Thanks!!!!

I did my correction for the new 35" Nitto Terra Grapler G3's this weekend as well. I started with the diameter published by Nitto. Oddly, I had to plug in and adjust it several times before it matched my phone-based GPS speedometer. It ended up being a much smaller number (~150mm) less than what...

Thanks! If there is enough interest, we could definitely do a wider slide, but the design would be a little different than our current products. The wider span has to be accounted for differently.

Cargo Glide has a strong handle on that product. There are a lot of things we would do differently from their offering, but I'm not sure it would be worth the R&D expense to go after that one.

Welcome! If you would like us to put something together for that, please let me know. I'm not sure we would have a lot of demand for 6 cans, so we would probably engineer one can mount, which we probably would have demand for, and just custom-build the system that mounted them to the truck.

6! That's a lot of weight (~240 lbs). I would want to really reinforce that. It would probably be a custom mount altogether as it would need to attach to the truck in different place than our BASE system does.

Thanks!