Search results

There are two sets of codes. The first is through the infotainment system and to see that code, as mentioned above, you need to stick your cell phone camera under the dash (left of drivers side) and take a picture of the ECU module which has it printed on it. I did that and while it did get me...

This is the Forscan google doc posted in this forum earlier this year. It is not comprehensive, and my not be 100% accurate, but it is a starting point.

Yes, there are two clips on the left and right of the fule tube, and to open the actual fuel 'door' inside, those two clips must be pressed to the side for the 'door' to be released. Basically, you need a tube of the correct diameter like the gas station filler or the funnel behind the seat.

The job 2 picture is just looking up at the joint, while the Job 1 is looking at it from the right tire well. To be sure we would need a job 1 picture looking up. Honestly, that picture doesn't look any different than what I saw when I installed my J-Braces a couple months ago. Since I...

I did the same thing before I bought them. I even sent them pictures of the opening showing the taper in the opening. They responded with the exact same message including the same dimensions. So, not 100% sure, but pretty sure they did not modify the lights to fit the 24 RR. If you measure...

Yes, like others have said. They look the same, but maybe they expect the lights to be put elsewhere on the grill. I did consider that when I installed them in the holes that are meant for the running lights, but there really was no spot for three lights and be in the general area. You could...

No, they don't fit perfectly. As mentioned they stick out a bit but they look really good. Since the openings are tapered, I could have made them fit better by increasing the size of the back of the opening but I chose not to risk getting too overzealous. Here is how they look. You can see...

I did install the F150 LEDs. Here is my post Running Lights

I checked mine and so far, it all looks fine. Will keep an eye on it.

Too funny, got the same lights and did the exact same thing in my first try as well.

Not sure a 'SuperCrew longbed' is possible in a Ranger without modifying the length of the frame. But to your point, maybe Ford brings back more cab/bed options.

I emailed the company regarding the inlays for the Raptor emblem on the back of the truck telling them I am almost positive that the F150 Raptor emblem is exactly the same as the Ranger's. They responded that it is not. I know several members have already bought the inlays and said they are an...

You don't need to remove the tires. Admittedly, that would make it easier, but I did the whole project with the tires on.

I guess that is correct, but I will say I have had a lot of cars with car mats that get way closer to the gas pedal and never had an issue.

I have an RR and ordered the J-Braces. It took me 2+ hours to install one side and about 1 hour to do the other side. I found the only tricky part was drilling out a single 1/4" rivet. To replace the rivet on reassembly, I did have to buy a $29.00 1/4" rivet gun since the rivet gun in my...

I have those and they are okay, my dealer included them with my truck. But they don't really protect the area around the gas pedal.

I got the same ones and for now I installed them to upfitter(aux) 1. But maybe I move to the parking lights. Like you I had to drill a pretty big hole from the back side to accommodate the plug but they look really good and they are very bright. I wanted to tuck them back into the opening a...

Still fairly rare. I have had nothing but compliments on the color and I have yet to get my ceramic coating. Once done, in two weeks, I will post here.

Maybe try this Neoprene strips - it does come in 2 thickness and various widths.

Lux Mats - They say they fit and have lots of options. Depending on your choice can be very pricey.