Search results

Nice! Those are definitely the best looking marker lights I’ve seen for mounting in those top 3 holes. The ones without a smoked cover over them look cheap and I love how these are flush to the opening. I would consider them if I didn’t already have the 4 indi carbon lights.

At least on my RR mud flaps helped keep the sides clean but they don’t help one bit with rocks hitting the rear quarter panel. If you look at the side of the truck and think about the angle, flaps would have to extend to an inch or two off the ground and have zero flex on the highway to be...

First off, the cup holder and even the tray next to the charging pad up front already have rubber mats in them that you can pull up and clean. I have the one that you linked. I mainly bought it for the doors and I thought some of the mats were for places that they actually weren’t for at all...

Weird, I saw someone on YouTube having this same issue on a ‘25. I have a ‘24 and this has never happened during my entire ownership of the vehicle unless I disconnect the battery to work on something.

I'm curious for anyone who has just upgraded this speaker. I know the common replacement is the Kicker KSC350. Anyone who has impressions of this change? I am concerned about it being overly bright after listening to reviews of it on YouTube. I am wanting to reduce the harshness of the stock...

Not at all. It comes from the factory with Motorcraft 5w30 synthetic blend from what I understand. I use full synthetic for the longer intervals.

You were hallucinating. Full Synthetic 5w30 is not sold in gallon containers even directly from Ford. Walmart also doesn't carry Full Synthetic 5w30 in any size container - even what they have on their website is all random marketplace sellers. Best place I have found to get it is directly from...

You clearly haven’t seen how much the OEM seat material costs on a RR… :p Just the bottom cover for 1 seat is ~600 retail maybe ~$400 at a discounted parts seller and that’s just the single piece shipped to you in a bag. Your prices are for a typical ranger. As with every brand, the parts for...

...I put a foot on the side step and step/raise up so I don't wear out the seat bolster, then stand on the side step and step down. I don't have an issue with it myself but maybe it's just that you aren't used to it? I had a buddy that kept doing the same thing and sliding down off the seat and...

Been using it for a few months. The widgets are a letdown for me as I don't like one screen with a smaller Apple Watch widget in the middle. I wish you could change the bottom left widget on the Home Screen to whatever you wanted. My favorite parts of it are the larger maps (CarPlay now scales...

That is HPR. Looks just like my truck. When it’s not in the sun it is straight up deep red.

It’s a setting in the center touch screen to pick which doors the touch sensitive handles unlock.

Unless you're in direct sunlight with the sun actually shining on the panel you're looking at HPR is very much red imo. Even when it gets a multi-tone orangey red in the sun I've never had anyone call it anything but red. At most they look for a minute and say 'it's kinda got a little bit of an...

I thought this was common knowledge? Even a quick search when I got my truck and was looking at them everything I read said they all constantly pull some power when the truck is off, and that was backed up by YouTubers I saw noting it when they installed them and people on car forums like this...

I installed mine myself and didn’t even come close to breaking a bolt. People are just in a rush and going too fast or using the wrong tools. I did take the time to heat them up with a heat gun, but they came right out no problem once they got hot.

1) Take it to the dealer and tell them to fix it. 2) Get some felt tape and start pulling the panels apart and fix it yourself Your attachment doesn’t work for me. But I had a slight rattle from the same area and I pulled the center console cover off and put some felt tape around some points...

There are so many threads that have explained what this is and you can also get an explanation from Chat GPT or google. So many threads about it we should have a sticky. Some people who have removed it have reported increased wind noise and chatter from the rear. Other people are hard of hearing...

You can fix every creak in the door panel super easily. My window switch creaked when you pressed down on it which I fixed reinstalling it with some felt tape. There was also a creak in the plastic I fixed just covering it on the inside with some sound deadener. One of the first things I do in...

I find the opposite. Over time the PPF becomes obvious and the seam stands out more and more. Also it doesn't do shit besides get torn up when a rock actually hits somewhere hard that would be enough to damage the paint or dent something. I had Xpel on a car and when I removed it after it got...

First off, have you removed them? I don't think they would install backwards since they are asymmetrical and there are clips and bolts in different areas. Unlike what people sometimes think I have removed one of mine because it was improperly installed from the factory and they are 100% open...