Search results

Got my Yakima rack stuff mounted. Got some 66” bars w/ my old Q towers.

Mine loses all my gauge selections every time. Seems like they only stick around a day or two. My RR is my daily driver.

That's exactly what I was looking to do!!! Awesome! So what is the mounting hardware like? My Q-towers have pan head hex bolts that stick down through the top portion of the mounting surface. I'm looking to find something to thread them into. I'm thinking just some square nuts of the right...

Has anybody figured out what to use in the t-slots for mounting things? Looking to mount my old Yakima Q Towers.

I got it OTA - my truck connects to my wifi at home. I've noticed a change in the icons at the top of the screen related to CarPlay. This morning, I had an icon that showed multiple phones at the top where the CarPlay icon used to sit. Presumably that's because my wife's phone was in range...

Resurrecting this old thread, as I'm thinking more and more about this. This post goes in-depth in non-Raptor B&O information. Look at the tweeter pods... My 2025 Raptor has the B&O section at the bottom of the A-pillar, not attached to the door in the sail panel area. This makes me wonder...

Found a $10 replacement plug on Amazon. For what it's worth, AutoZone and O'Reilley wanted upwards of $60 for the connector! Sheesh! Soldered the one from Amazon to the existing wires, disconnected the battery for ~30 min, and now everything's good. I do need to learn to de-pin connectors...

Looks like maybe its a "Motorcraft 2 Terminal Multi-Purpose Connector - WPT322". From what I can see online, it looks like they come with pigtails. Should be a relatively easy cut/solder job.

Like a dummy, I went to change my air filter without looking for wires to unplug first, and in doing so, I broke the purple wire on the temperature sensor wiring that attaches to the air intake. Any advice on what to do? Not sure of where to even look for a replacement plug. I thought maybe i...

Do you just cut off the white connector for a pos/neg lead to solder your 12V socket to? Looks like they have one without that plug on it: 12v Centre Console Socket Piggyback Harness Adapter For NextGen Ranger – RA Ranger

Hey RR folks — got a Muslogy cargo net for Christmas and tried installing it the other day. Ran into an issue: they included 2 upper eye bolts and only 1 lower, but that part’s fine since I already had lower ones. The problem is the upper bolts are marked M6, and I cannot get them to thread into...

Ok, thanks. Where is the hole that they run through near the center speaker? Did you have to drill?

Where do the wires run after they get through the front plastic panel that you drilled? I want to run a couple of USB-C cables that power my Trackform magsafe chargers, and I was hopeful I could do something like this. Thanks for going first! :sunglasses:

This place has them for the 2019-2023 Rangers. Wonder if they'd work. Not quite the aesthetic I'd prefer, but could be an option, maybe? https://customspeakerpods.com/product-category/vehicle-select/ford/ranger/2019-2023-ranger/

I'm curious about some pods for the A pillar as well. I have a 3-way component set that I'd like to install.

The link to Sounds Good Stereo in the original post to the harness & Keylok takes me to a 404 error page, as of 6/10/2025, 2:50pm CST. Is this the same setup? Factory Connection Harness to add a new Subwoofer Amplifier while retaining factory B&O including Unleashed

Awesome! We're headed to that part of CO in a couple weeks. I'd like to do Engineer Pass (being an engineer, and all), but this is my first truck and first vehicle capable of anything offroad. Not sure something like that is a good intro. I'd feel more confident if I had some more...

I cut the toughbed around the edges of the plugs once I learned they were removable plastic and drilled holes in them for the drain tubes from my retractable tonneau cover. That white thing made it difficult to run the drain tubes out without removing the plastic plugs. Once I removed the...

This thread was incredibly helpful. Thanks, everyone. I do have a little more gap between the headliner and the mirror panel than I did when I first took it off. I felt around for any clips that weren't engaged, and I think all of them are. Most people probably wouldn't see it, but since I...

I’ve got it positioned and clamped down, but I’m having a lot of difficulty getting the drain tubes to fit into the holes in the bed walls. Wondering if I should look for some replacement tubing. Upon more RTFM, it appears that you can route the rear drain tubes along the edge of the tailgate...