I ran 93 octane e10 in my 800hp gt500, and run 91 octane e10 in my RR. I did a quick cut and paste on an article that says it better than I could, but simply put, e10 works great for high boost engines like the RR.
Ethanol blended fuel is always better for turbocharged (and supercharged) cars...
Fwiw..... you can reboot the R button with removing the top ground wire w/10 mm, leaving it off for 15 seconds or so. I'm gonna just get a 10mm nutdriver and throw it in the glove box.
The low beams physically move with the steering wheel. The cornering lights come on with a turn at 25mph or less. You can remote start your vehicle, while standing in front, and you can watch the headlights will move for a couple of seconds, apparently calibration
Actually ordered mine thursday at the dealer, and they came in a day later (yesterday). Took about 20 minutes to remove the old pushpins, and install the mudflaps with the new pushpins. Having a trim removal tool set made removing the old pushpins simple. The mudflaps are high quality and...
There are a few threads here on this issue, but as I recall the oem lug nuts are m12 x 1.5, bulge type. Bulge refers to the contact area being a bit more extended. I've been told that our oem wheels are essentially bronco wheels. If you're changing out all of the lug nuts, I'd suggest going...
You can actually set up the RR as you want it, exhaust, steering, suspension, auto stop off, middle screen, and then save it all at once using the R button function. Works great
This morning I decided to try out using my remote to open/close the windows in my 2024 RR. This feature has to be turned on in Sync 4 using the dash tablet, and opens/closes all 4 windows at once. The specific sequence is outlined with the buttons that turn this feature on.
My first attempt...
A big ass sheet of plastic works well, just like a pool liner.....although a bigger truck bed works better. Me and some friends had a "pool" party using this method on the strip during the weekend of the indy 500. Was a crazy weekend
It's to drain water. Leave it be. Or better yet, just shoot some water from a hose into the bed and watch it flow out. You do not want the bed to be like a bathtub
I went out and measured mine, it's about 3/8 inch lower on drivers side with a full tank of gas. I'd suggest driving it for 1 to 2k miles to allow suspension to settle, and measure on level surface using a body panel, not the running board.
Thanks for all the great replies. I'll be fine as long as they didn't drop it on its top while taking it off the railcare ?
I have actually run into a railcar scenario before. I ordered a 2007 gt500 at close to msrp at a small town dealer where I previously lived. I was his #2 order (he...
Raptor was built on 2/14 and put on quality hold, and finally shipped by rail on 3/30. Delivered to KC rail yard on 4/3 and unloaded. Checked with dealer today (4/9) and he verified it's there using his geo locator, and that ford says delivery to dealer will be on 4/13-19. However, he also...