daedalus
Active Member
- Joined
- Apr 29, 2025
- Threads
- 3
- Messages
- 41
- Reaction score
- 60
- Location
- Bay Area California
- Vehicle(s)
- Santa Cruz soon to be Ranger XLT
- Thread starter
- #1
So, almost all parts are in for this little project.
Garmin Power Switch
https://www.garmin.com/en-US/p/718849/
ALTIQ Hidden Ditch Lights for the Ranger
https://altiq.com.au/collections/light-bars/products/altiq-wildtrack-next-gen-28-led-light-bar-kit
Caliraised 27w Side projecting Light Pods
https://caliraisedled.com/products/side-projecting-led-pods-sold-as-pair
AdventureLabs A Pillar Light Brackets
https://adventurelab.com/collections/ford-ranger/products/ford-ranger-a-pillar-light-brackets
SDHQ Switch Pros Power Module Plate
https://sdhqoffroad.com/products/24...ower-module-mount?_pos=7&_fid=f3daa6a96&_ss=c
I have the odd and end pieces in for wiring up the system. My one issue is that with the REDLINE hood struts, the Garmin can not be mounted to the SDHQ bracket, and allow the struts to work properly. So I need to run out and pick up some 6061 flange and sheet material to build a new plate location that will be cantilevered over the fuse box. Oh, this is going to be a lot of fun.
Garmin Power Switch
https://www.garmin.com/en-US/p/718849/
ALTIQ Hidden Ditch Lights for the Ranger
https://altiq.com.au/collections/light-bars/products/altiq-wildtrack-next-gen-28-led-light-bar-kit
Caliraised 27w Side projecting Light Pods
https://caliraisedled.com/products/side-projecting-led-pods-sold-as-pair
AdventureLabs A Pillar Light Brackets
https://adventurelab.com/collections/ford-ranger/products/ford-ranger-a-pillar-light-brackets
SDHQ Switch Pros Power Module Plate
https://sdhqoffroad.com/products/24...ower-module-mount?_pos=7&_fid=f3daa6a96&_ss=c
I have the odd and end pieces in for wiring up the system. My one issue is that with the REDLINE hood struts, the Garmin can not be mounted to the SDHQ bracket, and allow the struts to work properly. So I need to run out and pick up some 6061 flange and sheet material to build a new plate location that will be cantilevered over the fuse box. Oh, this is going to be a lot of fun.
Sponsored
