GoDirect
Member
- First Name
- Rob
- Joined
- Dec 4, 2025
- Threads
- 1
- Messages
- 6
- Reaction score
- 18
- Location
- California
- Vehicle(s)
- 2025 Ranger Raptor Azure Grey
- Occupation
- Retired
- Thread starter
- #16
Drove the setup for over 500 miles (onroad) since install. The reduced ride comfort level was noticeable as expected. I hooked up the FORscan and reset the ride height. The oem setting were all over the place because of the lift which explains why the ride quality suffered. After the reset, all four corners were the same. Also reset the tire diameter for the 35s.
Immediate improvement on the test drive. I would say 80-90% of factory.
https://goatoffroad.com.au/blogs/tech-talk/next-gen-ranger-raptor-ride-height-calibration
Immediate improvement on the test drive. I would say 80-90% of factory.
https://goatoffroad.com.au/blogs/tech-talk/next-gen-ranger-raptor-ride-height-calibration
Sponsored