BigMeatsBronco
Well-Known Member
- Thread starter
- #1
Hello I'm reaching out to all of the overseas Ranger Raptor owners. I need some help isolating the part number off of a transfer case off of the non-usa version Ranger. Specifically those that came with the 10r80 transmission when mated to the all-wheel drive transfer case that includes the goat modes. Since the regular Rangers available in the past we're available with the 10r80 I have tried using the transfer case off of the US version Ranger, however as far as I can tell none of them are available with the torque on demand all wheel drive system. They only had part-time four-wheel drive offered.
I am installing a predator 5.2 V8 engine into a Bronco two-door and we'll also be using the F-150s transmission which is the 10r80. The pattern on the back of the 10r80 is different than the pattern on the 10 r60. So I am looking for a transfer case that is not available here in the US that meets up to the 10r 80 and still has the available goat modes and all-wheel drive functions. If anyone can help me isolate the part number or help me find one of these special transfer cases it would be very helpful on my project getting to completion. Thank you
I am installing a predator 5.2 V8 engine into a Bronco two-door and we'll also be using the F-150s transmission which is the 10r80. The pattern on the back of the 10r80 is different than the pattern on the 10 r60. So I am looking for a transfer case that is not available here in the US that meets up to the 10r 80 and still has the available goat modes and all-wheel drive functions. If anyone can help me isolate the part number or help me find one of these special transfer cases it would be very helpful on my project getting to completion. Thank you
Sponsored
