Tuwa Shiprock Rack for T-Slot Rails and Bak Revolver?

[BrrRaptor]

Has anyone install the Bak Revolver tonneau cover with t-slots and Tuwa Shiprock Mid Height Rack for T-Slot Rails?
If so what do you think about how the two products together and maybe post some pics with the tonneau rolled up?
Thanks.

Sponsored

 

[Arsenall11]

I don’t have a picture of my mid rise rack on, we use it for our paddle boards. My chase rack also rides on the T slot, works great, all my hardware is stainless.

 

[BrrRaptor]

I don’t have a picture of my mid rise rack on, we use it for our paddle boards. My chase rack also rides on the T slot, works great, all my hardware is stainless.

Does the tonneau roll up ok without hitting the mid rack? Does the middle rake seem sturdy mounted on the tonneau t-slots?

 

[Arsenall11]

Rolls back to the pocket case no problem.

 

[RealTruck]

Has anyone install the Bak Revolver tonneau cover with t-slots and Tuwa Shiprock Mid Height Rack for T-Slot Rails?
If so what do you think about how the two products together and maybe post some pics with the tonneau rolled up?
Thanks.

The Revolver X4ts rolls up to about 9" - 10" in diameter. Tuwa states that the rack is 12.5" tall, so it's a safe bet that the cover will clear the cross bars if that's a concern. I'm also curious to know if anyone else is running this setup and what it looks like.

 

[BrrRaptor]

The Revolver X4ts rolls up to about 9" - 10" in diameter. Tuwa states that the rack is 12.5" tall, so it's a safe bet that the cover will clear the cross bars if that's a concern. I'm also curious to know if anyone else is running this setup and what it looks like.

I wasn't really concerned about the height of the horizontal bar on the rack, it's more of the sides of the tonneau cover when rolling it up and scraping the sides against the vertical rack post since they are angled in some and not straight up.
Please someone post if they have this combo.

 

[RealTruck]

I wasn't really concerned about the height it's more of the sides of the tonneau cover scraping the side vertical rack post since they angle in and not straight up.
Please someone post if they have this combo.

That's another good point that I was hoping to see. I, too, notice the angle of the uprights, and even the wide base of the uprights that are angled, and wonder how that all works together for the X4ts. Tuwa lists the X4s as compatible, so chances are that they've had the chance to test these products together. It's worth a shot to reach out to them directly for more information on how these work together.

Sponsored