Search results

This was all I used. Purple went to brown wire by tow hitch (Aux 4).

I ran them all the way to the battery and I think that was required due to the amperage and the Aux wiring is very thin and adcts as a swtich right? Not an expert. Let me find a photo I took of what I ended up with.

I didn’t take a photo of that before I wrapped it up but it’s right in front of the tow hitch. 2 browns. 1 is Aux 3 and the other Aux 4.

I’m just waiting for the elbow fittings above and then I can mount the chuck. I got the steel braided hose in 1M and it looks like it will be plenty long for this setup. https://store.arbusa.com/reinforced-stainless-steel-braided-ptfe-hose-0740203/

Yes, this goes into the compressor. I got mine running today and I am just waiting for those fittings and the steel braided hose and I will be done. There are 2 brown wires in the rear. One is Aux 3 I got first then I tried the other one and got Aux 4. I ran the plastic braided sleeving all the...

That makes alot of since, I probably would have gone that route if I knew they had the under bonnet mount. Hopefully I have mine running in the next day or two. Cheers

Much easier and much faster install, you just have to open the bonnet and attach the hose? You could run an air line to the rear also and have 2 chucks.

I got everything mounted today thanks to help from SurfRanger and Pirate Camp Co. Twin ARB with the Pirate Co mount and filter relocation kit behind the taillight. I took photos along the way but they aren't the best. It looks daunting at first but the project is not bad at all and fairly easy...

https://store.arbusa.com/hose-coupling-0740111/ that one, the other is for an optional manifold.

Thanks again, I will order the 25'.

Would one of these work SurfRanger? https://www.4x4truckleds.com/crystalux-25-power-extension-harness-for-arb-twin-compressors/ https://www.4x4truckleds.com/crystalux-10-power-extension-harness-for-arb-twin-compressors/...

Thanks again! If they don’t have them by the time I get everything together then I will be able to figure out how to extend the wires, it doesn’t seem too difficult. The steel braided line then should be 2m to be safe (if going arb brand, maybe 1.5m).

What length do we need for this if it’s all on the left side? I don’t want to order too long: “I also got the extended steel braided air line for compressor out to air chuck near power (arb brand but u can get whatever that fits)”. Bummer! It looks like Expedition Essentials is out of stock of...

Awesome, thanks so much! Cheers!

Do you have a screenshot by a chance of the items you ordered on Amazon?

Wow, very clean thanks so much! I will order everything and if you don’t mind I might have a few questions later when I get it all. Nice work and thanks for the photos!

How did your install go? I see it on Pirate’s site, I’m assuming you purchased the mount for the LH side. Did you need to purchase anything else for the install? Did you also put an inlet near the power outlets? Thanks!!

Cool, please keep us updated.

How can you control the lights or is it when braking only? Can they be used as chase lights with ambers constantly on? Thanks for the photos!