Search results

Do any of you have any experience applying fluid film undercoat to the new rangers? I'd be interested to hear your experience and any tips you have for the application.

Before the change it was reading a little high. I've changed the oil twice since I got it. No puddles or leakage that I can see. I did check the oil on the exact same spot.

I have a 2026 XLT V6 with about 2,300 miles. I changed the oil recently. I drained the oil for about 20 minutes then refilled with about 5.5 quarts of PUP. I ran the engine, waited 15 minutes and the oil level was right under the top dot. I thought all was well. I ran the engine for about 2...

My left rear door took some damage loading some heavy equipment in my back seat. It appears to be a scratch/gouge but it pretty shallow. Anyone know how to repair something like this?

I pulled the filter and it was stamped as FL-2062 not the FL-2062-A. I replaced it with the proper filter but I ran the 2062 for a few hundred miles. Do you think this is of any concern?

I'm okay with Walmart as a brick and mortar but this was purchased online from of their 3rd party sellers. I didn't catch it right away because the oil I used was shipped and sold by Walmart.

Yes I think that is how I ended up with the third party one.

Yes the box was a motocraft box.

I performed the first oil change on my 26 Ranger XLT. It was at about 700 miles and I ordered an oil filter from Walmart. I didn't realize it came from a third party seller until after I installed it. The box looked legitimate and showed the part number FL-2062-A. The oil filter itself had...