‘24 + Ranger 2.3L Downpipe

[IaintNOstranger]

Has anyone here with a ‘24+ 2.3L Ranger installed a Downpipe? Looking at the CVF pipe, but not sure of the fitment in the newer model as their website states 2019-2023.

Sponsored

 

[ATestBishop]

Bump up, had a similar question, can anyone chime in? Sone websites say 22-24 for the cvf pipe, I messaged them but haven't haven't heard back

 

[White willy]

2024 2.3 is the same engine from prior years.
2025 Ford basically used the updated 2.3 from the S650 mustang which is a combination of direct injection and multipoint,and is very different as far as Turbo and downpipe configuration.
I Would imagine the CVF downpipe would fit a 2024,but definitely not a 2025 and newer…

 

[ATestBishop]

That seems to be what I've gathered

 

[IaintNOstranger]

I just got work back from CVF and they said "Unfortunately it does not fit", but I don't know if I want to take their word for it. Like @White willy said the motors are the same. At least for Turbo fitment.

I also called Ford to check the part number for the Factory catalytic converter on the '23 vs the '24 and they told me that the '23 2.3l has two different part numbers listed depending on your VIN and that the '24 had a third entirely different part number. They were not sure as to what measure the parts are different though.

 

[ATestBishop]

I just got word back from CVF as well. They said no. The odd thing is SPD DOES say their 22-23 fits 24 as well but they don't show that on the website. I did ask CVF why some info online says 22-24 for the downpipe...

 

[ATestBishop]

Someone must have tried it as some point, it's just odd CVF and and SPD both list 22-23 but SPD says it also fits 24 but yet they don't list it on their website as such

 

[ATestBishop]

So I did call SPD and they said they had never test fit their downpipe on a 24 Ranger, other than that I didn't get much information other than an email address that could potentially lead to a trip up there for a test fit, definitely not sure about that. So it's still really an unknown, if nothing from CVF/SPD fits they really didn't seem to indicate that it would be likely either would offer anything 24 specific

 

[IaintNOstranger]

There is a local shop here called exhaust addicts that has done a couple custom exhaust installs. I may go by there and see if they are interested in getting one mocked up. Maybe they can be the only one selling it!

 

[ATestBishop]

Please let them know Id be interested in one as well, was thinking the gesi 400c cat would be good to have. I contacted a manufacturer in Indonesia but they don't have access to a NA 24 Ranger

Sponsored