Anyone use this brand for Raptor decals?

[25Dsand]

I was looking for the oem style graphics for my 25 RR and came across this site and wanted to know if anyone has tried them out? I hear a few things on other places not being so good so not sure if worth the try?

https://option4wd.co.nz/products/sticker-package-for-ford-ranger-raptor-2022-next-gen

Sponsored

 

[pohnz1]

Nope. Imop. Rocky mtn graphics on Etsy is best.

 

[CoastieN70]

I too have Rocky Mountain Graphics on my RR.
BTW, installing these graphics, be they Rocky Mountain or some other company's, is not as easy as most people think. It is doable but takes patience and finesse.

 

[25Dsand]

Thanks I will take a look on Etsy

 

[Chippewa76]

What these guys said. Rocky Mountain Graphics.

Their graphics are also Authorized by Ford.

Follow the directions. Be patient. Do it in the shade. I marked out the area with blue tape and used a small credit card sized plastic card with thin fabric on it to remove almost all the bubbles. I had gotten it years ago for window tint. I suppose a small firm rubber squeegee would work too.

As I looked down the length of the graphic, I used my fingers to press out the remaining tiny water/air bubbles out of the edges. Start on one end, work your way down to the other. Then go back and look again. Be patient.

Because I was able to push out all the tiny water/air bubbles out with my fingers, I did not have to use a pin. I really wanted to stay away from doing that and was successful.

NOTE: When you apply the graphic, IF you pull or push the graphic hard, you can accidentally reposition it on the truck and not know. Ask he how I know. I had a “redo” on one side. But again, they look perfect.

IDK, instead of using painters tape, which was a pain because it doesn’t adhere that well, maybe I should have made a few marks with a sharpie. Then after I was finished, use IPA to remove the sharpie.

 

[ScoMay23]

I ordered from Rocky Mtn Graphics based on previous positive reviews that I had read. The decals I received looked pretty cheap. There were numerous imperfections in the printing. I decided NOT to use them.

 

[ScoMay23]

These might have been a better choice for my needs. Have not ordered them yet though.

https://www.indicarbon.com/products...ics-decals-sticker-kit?variant=51776402358555

 

[pohnz1]

I ordered from Rocky Mtn Graphics based on previous positive reviews that I had read. The decals I received looked pretty cheap. There were numerous imperfections in the printing. I decided NOT to use them.

Those are air pockets. Mine looked the same. I've had 3 different sets from them. No issues with anything. Look closer. They're fine

 

[Chippewa76]

I ordered from Rocky Mtn Graphics based on previous positive reviews that I had read. The decals I received looked pretty cheap. There were numerous imperfections in the printing. I decided NOT to use them.

Glad you posted this.

Exactly what Pohnz1 said above and I quoted below.

Mine looked the same too. There is nothing wrong with those graphics. What you're looking at is the air gap between the top application sheet and the double thickness outline layer. They are not cheap.

If you have any questions, give RMG a call during their business hours. I believe one of the guys I spoke to was John. Great guy, very helpful. IIRC, he was the owner.

Follow the application directions from RMG.

Also use the info I posted above for reference. Especially getting the tiny air bubbles out with your fingers. It's worth it. Just be patient. It'll work out just fine.

Those are air pockets. Mine looked the same. I've had 3 different sets from them. No issues with anything. Look closer. They're fine

Sponsored