Catcher24
New Member
- Joined
- Jul 20, 2024
- Threads
- 1
- Messages
- 2
- Reaction score
- 0
- Location
- Orange County, CA
- Vehicle(s)
- 2024 Ford Ranger XLT FX4
- Thread starter
- #1
Hey folks,
I recently installed the MX4 on my 2024 Ranger. Am fairly confident I installed per instructions but once I got the rails to torque, things got funky.
One issue was that the plastic bed rails began to warp. But the biggest was that I could now slide the cover side to side enough for it to unlock. It also wouldn't latch as easily. Even when I adjusted the latches, I still had the same issues.
To me it seems like the cover is too narrow or the rails are too wide.
Waiting to get help from BakFlip but wanted to get the community's feedback.
I recently installed the MX4 on my 2024 Ranger. Am fairly confident I installed per instructions but once I got the rails to torque, things got funky.
One issue was that the plastic bed rails began to warp. But the biggest was that I could now slide the cover side to side enough for it to unlock. It also wouldn't latch as easily. Even when I adjusted the latches, I still had the same issues.
To me it seems like the cover is too narrow or the rails are too wide.
Waiting to get help from BakFlip but wanted to get the community's feedback.
Sponsored
