FossIsleBC
Well-Known Member
- First Name
- Steve
- Joined
- Feb 10, 2024
- Threads
- 13
- Messages
- 100
- Reaction score
- 103
- Location
- Victoria, BC
- Vehicle(s)
- 2024 Ford Ranger XL
- Thread starter
- #1
She's going in next week to have a couple of things tweaked that I noticed during the PDI so I can get them to deal with it, but wondered if anyone else had encountered this.
Windshield washers don't spray. When I activate them I can hear the motor working fine. And yes, the reservoir is full of washer fluid. But nothing comes out of the nozzles, not even a dribble. They can't be clogged already on a brand new truck. And nothing's spraying all over the ground from a hose not being connected to the nozzles. I thought maybe the lines were empty and it needed quite a bit of priming but I've held the handle back towards me and activated them til the motor quit after about 10 seconds (presumably auto shut off so you don't run it dry? I don't know). In any event, I'm stumped. Anyone else encountered this and been able to figure out what the problem was?
Windshield washers don't spray. When I activate them I can hear the motor working fine. And yes, the reservoir is full of washer fluid. But nothing comes out of the nozzles, not even a dribble. They can't be clogged already on a brand new truck. And nothing's spraying all over the ground from a hose not being connected to the nozzles. I thought maybe the lines were empty and it needed quite a bit of priming but I've held the handle back towards me and activated them til the motor quit after about 10 seconds (presumably auto shut off so you don't run it dry? I don't know). In any event, I'm stumped. Anyone else encountered this and been able to figure out what the problem was?
Sponsored
