Review of TripleAliners Bed Mat

Application: 2026 Ford Ranger XLT with factory spray in liner.

First of all I have never had nor have another brand to compare to so these are my impressions of this bed mat.

Arrived in a very large box that probably could have fit four of these mats but tuned out handy as I could use to lay mat on top of in the sun.

Following the instructions I laid out the mat in the sun for two days. Day one was cloudy and around 50 degrees at best. Day two was full sun and a high of 60 here in the North East.

Now one could also lay weights on top or pour warm water on I but went the sun route.
I also added some black pipe and a rock to help press down on raised areas.

On to the mat, fits like a glove. You can see that they took their time in obtaining the measurements. The mat itself sits flat about 98% of the time and since its been fairly cool here I expect it to flatten down even more in the summer. But I’m being very picky here.

It has become easier kneeing down in the bed with this mat vs the spray in liner with had a very hard texture.

My only concern is without a tonneau cover or cap one should weight it down so it does not become airborne driving at highway speeds. Unless anyone can comment on this.
Now since there is sides to this mat you will become shorter than 48” at the wheel wells but I assume one can simply lay material on top of.

Overall, belt and suspenders (spray in liner + TripleAliners bed mat) makes a great combo IMO.

Link - https://www.amazon.com/TripleAliners-Truck-2024-2026-Ford-Ranger/dp/B0CQPB618G

How “grippy” is it to keep things from sliding around? Thanks!

It appears to be more grippy than the spray in liner for harder items. But not as grippy than say a rubber mat. Soft items may grip better with spray in as its like sandpaper which may wear them down too.
Only had a few days and temperature may affect grip.

Just like a bed cover - no perfect solution. I occasionally carry skis in the bed and try to pick them up and set them down. I hate the thought of dragging them across the bed liner.

$Bill said:

Just like a bed cover - no perfect solution. I occasionally carry skis in the bed and try to pick them up and set them down. I hate the thought of dragging them across the bed liner.

Click to expand...

Exactly, I carry straw and hay and with the spray in it clings and get under bed bottom towards the cab.

They were suppose to sent me one too to review but since I live in Canada they never sent one. Would have liked to see how it performed in our nasty weather.

How are you guys getting all this free stuff??? Sign me up!!

I have the LasFit version of this and so far so good. Excellent fit and doesn’t move at speed. It’s also very light so I just take it out when u wash the truck to rinse out any dust accumulated between the paint.

I use my bed like most use an SUV cargo area so this mat is perfect. If I was a contractor doing demo work, I’d want a full spray in. I’ve had em before and $500-$600 is just money wasted for me, PLUS these mats are waaaaay easier on the knees!

I think they are all the same and they have the pattern in the scallops at the tail gate wrong and there is an indent in the mat near the wheel well that doesn’t exist.

and the front edge of the mat leans toward the cab but the front wall of the bed leans toward the tailgate so there is a gap at the floor of the bed between the mat and the bed.

purdyd said:

I think they are all the same and they have the pattern in the scallops at the tail gate wrong and there is an indent in the mat near the wheel well that doesn’t exist.

and the front edge of the mat leans toward the cab but the front wall of the bed leans toward the tailgate so there is a gap at the floor of the bed between the mat and the bed.

Click to expand...

Not sure about the wheel well on passenger side. There are 3 indents of which 2 go down to the bed. The mat is molded so that these 2 indents are accounted for.

The little indent in the mat doesn’t exist in the bed.

purdyd said:

The little indent in the mat doesn’t exist in the bed.

Click to expand...

Oh ok I got you... that rectangle indent exists in the mat but not the bed.