Found a nice center console organizer tray, red edged silicone pads for Raptor

[John E Davies]

The OEM tray is a joke, it is tiny and WILL fall into the bottom of the compartment if you try to set it back carelessly. This one works great, is about 2" deep, so a big glasses case fits on its side, with lots of extra room for small stuff. The sticky red-edged silicone pads look great next to the Raptor seats, they add some visual bling to what otherwise is a black hole. Decent price and construction, I like it a lot! Recommended!

Autorder Center Console Organizer for 2024 Ford Ranger Accessories Armrest Storage Box Secondary Insert Tray with 2 Color Mats (ONIF FIT Electric handbrake Version)

John Davies
Spokane WA USA

Sponsored

 

[pappacrunch]

Thanks for helping me part with another $20.

 

[CACTUSGREYFX4]

I got one similar off ebay and had it even before my truck arrived

 

[FloppyKnockers]

This is a great addition to the truck. The only thing I didn't like was the hole that's provided so you can still use the 12v socket. I'm working on prototypes to print a plug for it. This is what I've got so far. Once I get the shape and little ledges dialed, I can work on making it useful. Little bin for small parts, put some holes in it for golf tees, etc.

 

[Mgrmax]

This is a great addition to the truck. The only thing I didn't like was the hole that's provided so you can still use the 12v socket. I'm working on prototypes to print a plug for it. This is what I've got so far. Once I get the shape and little ledges dialed, I can work on making it useful. Little bin for small parts, put some holes in it for golf tees, etc.

I’d be interested in buying one of those plugs when you get it dialed in.

 

[FloppyKnockers]

I’d be interested in buying one of those plugs when you get it dialed in.

I can make that happen. Should get the right shape this weekend.

 

[The Lone Ranger]

This is a great addition to the truck. The only thing I didn't like was the hole that's provided so you can still use the 12v socket. I'm working on prototypes to print a plug for it. This is what I've got so far. Once I get the shape and little ledges dialed, I can work on making it useful. Little bin for small parts, put some holes in it for golf tees, etc.

Is that open space the square area in blue ? .... or am I not looking at this correctly - I was looking for something like a hole for a charging cord.

 

[FloppyKnockers]

Is that open space the square area in blue ? .... or am I not looking at this correctly - I was looking for something like a hole for a charging cord.

The blue used to be the open space that you would pass a cable through. Since I do not need that feature, I would rather plug it and not have parts fall down below. The blue bit is my prototype plug.

 

[Ag3ntC00p3r]

I have this and use the hole to drop my gas receipts into the lower section. Top section I use for sunglasses, microfiber cloth, and miscellaneous center console stuff.

I do find it is not a perfect fit and if you move the organizer it can get a little tippy until you reseat it.

 

[The Lone Ranger]

The blue used to be the open space that you would pass a cable through. Since I do not need that feature, I would rather plug it and not have parts fall down below. The blue bit is my prototype plug.

Thanks - let us know when you come up with a good fix.

 

[FloppyKnockers]

I have this and use the hole to drop my gas receipts into the lower section. Top section I use for sunglasses, microfiber cloth, and miscellaneous center console stuff.

I do find it is not a perfect fit and if you move the organizer it can get a little tippy until you reseat it.

I would yell "This is Sparta!!" after every fill up before I send the receipt to the pit of its demise!

Mine had a slightly sloppy fit at first too. I got a clamp and configured it to spreader mode. Put a bit of pressure on the sides, then hit it with a heat gun being careful not to melt it - just soften it. Let it cool down naturally and the fit is way better.

Thanks - let us know when you come up with a good fix.

I think I have a good one. I got the shape down and printed a decent plug. Since I don't use it for eternally condemning receipts, I plugged it so nothing can fall into the pit of despair.

 

[The Lone Ranger]

Will we be seeing the finished product selling on Amazon

 

[RANGER/HOBB]

Found another that has two trays, upper and lower;

https://www.amazon.com/gp/product/B0DBVBZM3G/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

Going to try these out and see.

 

[The Lone Ranger]

Let us know what you think after you try them.

 

[Gary]

The OEM tray is a joke, it is tiny and WILL fall into the bottom of the compartment if you try to set it back carelessly. This one works great, is about 2" deep, so a big glasses case fits on its side, with lots of extra room for small stuff. The sticky red-edged silicone pads look great next to the Raptor seats, they add some visual bling to what otherwise is a black hole. Decent price and construction, I like it a lot! Recommended!

Autorder Center Console Organizer for 2024 Ford Ranger Accessories Armrest Storage Box Secondary Insert Tray with 2 Color Mats (ONIF FIT Electric handbrake Version)

John Davies
Spokane WA USA

My truck didn't come with a tray which I thought was odd.

Sponsored