FSE-LA
Gold Sponsor
- Joined
- Apr 29, 2024
- Threads
- 1
- Messages
- 35
- Reaction score
- 47
- Location
- Irvine, CA
- Vehicle(s)
- Ranger Raptor
- Thread starter
- #1
Precision Engineering, Zero Compromise.
Dear Ranger6G members,
We're reaching out today with news about our brand new Titanium A-Pillar Brackets and to share a bit about who we are at FSE. Before we get into the details, we want to express our heartfelt gratitude to this forum. Your support and feedback have been invaluable, inspiring us to continually improve our offerings for the Ranger Raptor platform.
A Bit about FSE
FSE is a shop based in Irvine, California, primarily focused on supercar customization and racing support. Our facility is equipped with 3D scanning, 3D printing, and CNC machining capabilities, which we use for various engineering needs.
When we first got our hands on a Ranger Raptor, we were genuinely impressed. It quickly became clear to us that this truck is a high-performer, deserving the same level of engineering we typically reserve for the supercars we work with.
A Titanium Dream
Today, we are introducing our V2 A-Pillar light brackets. This isn't just a minor upgrade; we've completely redesigned them from the ground up. Our goal was to create a product that demonstrates our commitment to quality manufacturing and attention to detail.
Here's what sets our V2 brackets apart.
Aesthetics & Engineering:
- Precision-Crafted from 3mm TA1 Titanium
- Laser Welded Reinforcement
- Matte Black Anodized Surface Finish
- Laser Etching Logo.
- Extremely Lightweight for its Strength: Only 0.5 lbs.
Design Improvements over the Original Product (V1):
- Sleeker bracket geometry and redesigned reinforcement to fully eliminate its interference with the plastic cowl.
- Incorporating a cutout to expose the factory front windshield washer line clip installation location.
- Offering an extra clear TPU film protection on the lip of the hood. Reducing risk of chipping or damaging the factory paint during installation.
This product is available for pre-order with an estimated shipping date of October 15, 2024.
Dear Ranger6G members,
We're reaching out today with news about our brand new Titanium A-Pillar Brackets and to share a bit about who we are at FSE. Before we get into the details, we want to express our heartfelt gratitude to this forum. Your support and feedback have been invaluable, inspiring us to continually improve our offerings for the Ranger Raptor platform.
A Bit about FSE
FSE is a shop based in Irvine, California, primarily focused on supercar customization and racing support. Our facility is equipped with 3D scanning, 3D printing, and CNC machining capabilities, which we use for various engineering needs.
When we first got our hands on a Ranger Raptor, we were genuinely impressed. It quickly became clear to us that this truck is a high-performer, deserving the same level of engineering we typically reserve for the supercars we work with.
A Titanium Dream
Today, we are introducing our V2 A-Pillar light brackets. This isn't just a minor upgrade; we've completely redesigned them from the ground up. Our goal was to create a product that demonstrates our commitment to quality manufacturing and attention to detail.
Aesthetics & Engineering:
- Precision-Crafted from 3mm TA1 Titanium
- Laser Welded Reinforcement
- Matte Black Anodized Surface Finish
- Laser Etching Logo.
- Extremely Lightweight for its Strength: Only 0.5 lbs.
Design Improvements over the Original Product (V1):
- Sleeker bracket geometry and redesigned reinforcement to fully eliminate its interference with the plastic cowl.
- Incorporating a cutout to expose the factory front windshield washer line clip installation location.
- Offering an extra clear TPU film protection on the lip of the hood. Reducing risk of chipping or damaging the factory paint during installation.
This product is available for pre-order with an estimated shipping date of October 15, 2024.
Sponsored