My RR hood is sits a little lower than flush with the fender

[Boo_Radley]

It’s maybe a 1/8-1/4” too low on the drivers side. Is that something that can be fixed with hand tools and a little patience? I’m not a mechanic, but would like to adjust it since it bothers me every time I notice it.

there’s a bump stop there - is it as simple as raising the bump stop up a little?

Sponsored

 

[1996-to-2025]

Following. My hood is a smidge low on the passenger side, most noticeable up by the windshield, not as bad near the front. Only issue I've found on the exterior, otherwise panel fit is good.

 

[ColeTrainsRR]

Bump stoppers and shims i fit bugs you

 

[Boo_Radley]

Fixed it. Turns out the bump stops have built in plastic threads and you just rotate the bump stop counterclockwise until it raises up a bit. Got it right on the first try. The hood requires a little more force to close now, which makes sense.

 

[Johnny 5]

It’s maybe a 1/8-1/4” too low on the drivers side. Is that something that can be fixed with hand tools and a little patience? I’m not a mechanic, but would like to adjust it since it bothers me every time I notice it.

there’s a bump stop there - is it as simple as raising the bump stop up a little?

My wife and I both have Ranger Raptors, both of our hoods were off. Our Dealer sent them to a reputable body shop and fixed for free under warranty.

Sponsored