Tailgate folding step ladder installed 2024 Ranger Raptor

[KnightRaptor]

Just sharing this, in case some of you might find this useful…

I had 2 F150 Raptors in the past and I missed having the tailgate steps.
I had 2 5th gen Rangers in the past, that had the retractable step but for some reason,
I dont think they have one that fits the 6th gen Ranger Raptor due to the exhaust location.
(I do remember seeing a thread about the retractable step for a RR, but they dont ship to USA).

Anyway, After seeing several different models on amazon, online and ebay…
I decided to get this model: https://www.amazon.com/KEWISAUTO-Fo...ce-8bd1-45b5ff5a7546&pd_rd_i=B0DBZGDGRT&psc=1
because it has a pivot feature, folding, and a grab handle.

Note that on description, its the shorter 42” model thats compatible with a 51” tailgate width.
But when I got it, I knew right away that it needed a slight mod for it to clear the Tailgate latches.
(see pics)

I assembled the ladder per instructions, but I had to modify the pivot base, using a grinder
to cut a notch to accomodate the Ranger’s Tailgate latch(see pics).

That was the only hard part! I might’ve been overzealous with the grinder, as I hit part of the
round pivot area(see pics) Good thing it Did not effect it in any way. LoL

The rest was easy, as I only had to drill 3 holes on the taigate (a fourth one is optional, due to the base hole not sitting flush with the tailgate surface).

I used the provided self tapping screws to secure the pivoting base (see pics) and I didnt need to drill extra holes for the ladder straps, because I used the 2 existing tailgate screws instead ( see pics).

What I like about it:

With the pivot feature, I can use it on the back or side to access the bed.

Its very Stable, once you secure and tighten the knob on the pivot base.

It has a folding grab handle.

Its good quality, and the coating almost matches the bed liner.

It tucks neatly behind the tailgate when not in use.


Things I dont like about it:

So far none, but I will update this post in the long run…

Sponsored

 

[MauiMax]

Im guessing this will only really work if your truck is still stock height right?

 

[KnightRaptor]

Im guessing this will only really work if your truck is still stock height right?

Per product descrption, it accomodates up to 42” of tailgate height.
I believe the Ranger Raptor tailgate height is around 34-35”.
(my 24 Ranger Raptor is stock height)

 

[MauiMax]

Thank you! I probably should have clicked the link and found that but thats great to know. It would probably work with a lift and 35s even

 

[KnightRaptor]

Thank you! I probably should have clicked the link and found that but thats great to know. It would probably work with a lift and 35s even

I Rechecked the link and posted the correct model I installed.
(There are different ones, just make sure its the 42” model as the 45” would be too long)

 

[some_guy]

pretty cool. I will have to save this for when i am an old man

 

[Lion77]

How heavy is the whole thing? Maybe 25lbs or less?

 

[Dino Jockey]

Just sharing this, in case some of you might find this useful…

I had 2 F150 Raptors in the past and I missed having the tailgate steps.
I had 2 5th gen Rangers in the past, that had the retractable step but for some reason,
I dont think they have one that fits the 6th gen Ranger Raptor due to the exhaust location.
(I do remember seeing a thread about the retractable step for a RR, but they dont ship to USA).

Anyway, After seeing several different models on amazon, online and ebay…
I decided to get this model: https://www.amazon.com/KEWISAUTO-Fo...ce-8bd1-45b5ff5a7546&pd_rd_i=B0DBZGDGRT&psc=1
because it has a pivot feature, folding, and a grab handle.

Note that on description, its the shorter 42” model thats compatible with a 51” tailgate width.
But when I got it, I knew right away that it needed a slight mod for it to clear the Tailgate latches.
(see pics)

I assembled the ladder per instructions, but I had to modify the pivot base, using a grinder
to cut a notch to accomodate the Ranger’s Tailgate latch(see pics).

That was the only hard part! I might’ve been overzealous with the grinder, as I hit part of the
round pivot area(see pics) Good thing it Did not effect it in any way. LoL

The rest was easy, as I only had to drill 3 holes on the taigate (a fourth one is optional, due to the base hole not sitting flush with the tailgate surface).

I used the provided self tapping screws to secure the pivoting base (see pics) and I didnt need to drill extra holes for the ladder straps, because I used the 2 existing tailgate screws instead ( see pics).

What I like about it:

With the pivot feature, I can use it on the back or side to access the bed.

Its very Stable, once you secure and tighten the knob on the pivot base.

It has a folding grab handle.

Its good quality, and the coating almost matches the bed liner.

It tucks neatly behind the tailgate when not in use.


Things I dont like about it:

So far none, but I will update this post in the long run…

Been waiting for someone to do this. Concerned with how well the self tappers hold over time. Disabled here and would love to do this vice carrying around the small step ladder. Keep us posted please.

 

[KnightRaptor]

How heavy is the whole thing? Maybe 25lbs or less?

Its pretty light, bec its made of aluminum.
Its only 11.58 lbs, per amazon item description.

 

[Elfman]

I like your hi-viz gear. Who makes that orange duffel? Nice ladder, too, by the way!

 

[KnightRaptor]

I like your hi-viz gear. Who makes that orange duffel? Nice ladder, too, by the way!

Thanks
Its actually an emt bag I got from amazon awhile back.
(I keep first aid kit on all our vehicles)

 

[JKeys]

I wonder if that will fit with a Decked system?

 

[KnightRaptor]

Been waiting for someone to do this. Concerned with how well the self tappers hold over time. Disabled here and would love to do this vice carrying around the small step ladder. Keep us posted please.

I will update if I encounter any issues with it.

It actually came with ample amount of short and long self tapping screws
with sealing washer on them(see pics).
Gives the option of adding more screws for base stability if needed.

 

[KnightRaptor]

I wonder if that will fit with a Decked system?

Not sure about the decked system.

I have 2 pivot boxes on both sides and
I didnt have any issues closing the tailgate after install (see pic).

 

[Lion77]

I can live with +12lbs of additional non-rotating mass for that level of convenience. Why Ford didn't do this on the Raptor is beyond me...I get that it's a bare bones performance truck, BUT, one or two little things like that can go a long way to making it more livable for a variety of uses.

Sponsored