Search results

I know this concerns Raptors. But asa non Raptor owner I looked into bottle jacks and found that the height of the jack points if one had a complete flat was so low that a bottle jack had to be less than 6". Any concerns with a RR or the minimum clearance allow for a bottle jack?

Or... I'm wondering if I went to turn up the volume and was too far left D'oh

2026 Ranger XLT I'll try and recall what I did and what happened. Trying out voice commands: Ok Google what time is it? Beep but no response. Tried this like 3 times. Then Alexa what time is it? Answers with time Tried Google again and thus time it answered with time but... Then heater jumped...

An update, just test fit and the bottom of the arm rest is concaved. Make a shim vs doing a whole reprint and test fitted. Still too cold here in the NE to work on comfortably.

Yes I rounded the top and bottom of the lid so when opening it clears better. New design will have a piece coming up to hold contents in. If that makes sense. I'll also attach magnet onto it which will connect to lid. Nothing fancy just use empty space to hold registration, insurance card and...

I won't sell it, probably just post it on a 3D sharing site.

Interesting idea I was figuring registration and insurance card. Perhaps if someone broke in they would mis seeing this cubby in the dark vs glove box

Nano tape

This is a prototype of a storage compartment that I'm working on. It's small so that it fits between the Muslogy console padding straps. If I like it and get some black filament I'll reprint. A magnet will be used to keep closed.

K&N filter had too much oil and clogged up MAF sensor?

IT engineer as well (retired) This being my daily driver I'm hesitant. Searching on topic it's seems that once one signs up, nothing happens. Be interested if you receive any beta code.

https://www.ford.com/support/how-tos/ford-technology/software-updates-general-information/what-is-the-ford-early-access-program/

Well I usually do betas but with a vehicle I'm not sure. It's an invite but acceptance is not guaranteed.

Just received an email from Ford to try out for their software beta program. Wondering if anyone has applied before or plan to do so now assuming received an invite.

I was wondering the same thing about max speed one could engage 4 wheel drive. The manual doesn't seem to state. However it states the rear locker can be engaged at up to 20 MPH and unlimited if in Sand or Mud rut mode. Page 210

There should be no funnel. A bar should extend to the bumper with a 1/2 or 3/8 end. This way no fumbling trying to get that rod into the funnel.

Since I just had to change a flat I found that a 7/16 inch socket will work to lower tire. This with a long ~27" extension may come in handy.

Driving through a wet area in road from a spring and asphalt broken up. I heard something Metallica then pop.

Learned how to change a flat. Less than 100 miles on her. I'd say practice taking that spare down, took us forever to figure out that funnel guide on the side of the road.

Interesting as I would have figured sleep mode if voltage fell below threshold and after say a week. Thanks