Search results

I love my truck, but the decal, while nice, was just a little too Dull with the stead pLain color, So i add a Nice Red SPORT 4x4 Decal from a 2011. got the decals New- NOS OEM. I Love the new POP! Likey?

They are removable. I took mine out and store them behind the rear seat.

I had a 2020 with a factory tow package. On the 5G there wasn't a factory TBC option, but there was a dealer installed option later. Tucked slighty up behind the drivers kick panel was a insulated set of wires for a brake controller. I added one. It was the returns for the 7 pin and a Power and...

so, this is just a general kind of yes?

yeah, i guess an insert of some type would be pretty difficult....

Any 2.3L Tunes? Any news on a Ford Performance Tune?

Why not just put it in the back of the passenger flap?

^^ THIS ^^ I've installed large decals, You carefully plan the placement and use a Sharpie to make reference dots. Use a water solution with Just enough dish soap in it to slide the decal around. Yes, you install them wet, and squeegee them out carefully. A Wrap shop is your friend.

So, completed the install on the Passengers side. Took about 2 -2 1/2 hours. Better and worse than i thought. first, you only need HB-1 and HB-2 bolts. No other hardware, it's either on the new part, like the white clips, or can be reused. Couple tricky parts, 1. First remove the inner wheel...

Just picked up my "Front Bracket", Called "Reinforcement" on packaging N1WZ-E20022-B (right side). It's actually all 3 support bracket pieces pictured ( And previously listed in the parts table ) Front, rear and joining bracket. They are spot welded together. I have to return the Rear and...

The 2.3 has been out for many years, in the previous gen '19 Ranger and in the mustang befor that. Ford has had the time to work the bugs out. It's basically bullet proof at this point. Has a hefty chain driven oil pump. 2.7 seems schetchy to me. Plus they say you can tune the 2.3 for 400ft/lbs...

For those following this thread as I was, I am also attempting this upgrade. I chatted with the OP, and he said go ahead and post what my experience has been, and what I'm really good at- ie: Critiqueing other peoples work! LoL! So got all the parts for just the Rt side from OP's list. The Front...

Looks great. I used my factory points at the Ford site so just paid shipping, like 10 bucks. I can confirm they fit great with no drilling or mods!

It says 08%, there's no decimal there. it could say 17%, or 09%. It's 8%. but I'm pretty sure the sheet metal is stamped here, and the Engine and trans are made here, So, don't know how they count parts percentage. Is an eninge the same as a bolt?

Not sure about that tool, my truck was manufac a good 4 mos ago and it shows no Vin released.

Absoloutly, It's dirt cheap at 450 bucks and an Immense and Huge help in any off road situation, even a dirt road. Nearly impossable to seemlessly integrate in after the fact and hugly expensive after the fact. Get it. And at least the Basic if not the enhanced Tow package. Must haves for any...

It's not an option, So, how are you gonna enable something that doesn't exist?

Can you give me the part number off the packaging for the Front Rt bracket? Or, alternativly, your contact that got it? My dealer cannot find it, though he tried! Could you also shed some light on what was involved with the rear bumper? You said you had to loosen it, just unplug the sensor...

Sounds like a pain. There's a couple of Youtube vids mainly of front flares being removed. All say your gonna break clips but are availble from ford. Just white plastic clips. i'll get a few. I have all the parts coming for a Rt side install thanks to your table! But can't find the front Support...

If it's just a button, you could parallel off of it, 2 wires to a contact type button that rests against the tailgate. When opened, it would activate. So, yes you could do it, but it's not a BestBuy type install.