Problem inputting new PIN for door keypad

[Mikefili]

I programmed a new pin # on mine using the keypad on the door. I used the same pin# from my 2020 Raptor because it was easier to remember.

Greetings, I have a factory installed keypad (color matches the truck) on the drivers door of my 2024 XLT FX4. The keypad came with a 5-digit factory code that words just fine with the door keypad. I understand there can be additional codes in use besides the factory code and one just programs the code in settings on the 12" screen. Consequently, when I tried to input my own keypad code into the settings I received an error stating I have an invalid factory code. However, this code is the same 5-digit factory code that came with the vehicle and works on the door keypad. I've been told by the local Ford service department that aftermarket keypads have been installed in the factory on some vehicles, but they generally are black and don't match the color of the door. Mine matches the color of the door and it would be nice to be able to program in my own code.

Any solutions or suggestions out there?

I had the exact same problem trying to change it from the center screen, it will not work from the center screen, that was confirmed by my dealer, based on his on the phone instructions I changed it from the door mounted key pad, that after trying for days on the screen

Sponsored

 

[Parknas54]

Well after going into my glovebox to remove my window stickers and other items I put in there when I purchased, found another key card with a different code which worked. So had three different codes but at least one worked!