Sponsored

Raptor Full Door sill Protectors

2024raptor

Member
Joined
Jun 28, 2024
Threads
2
Messages
9
Reaction score
2
Location
Philippines
Vehicle(s)
Ranger Raptor
Scrolling thru Youtube found this.
Channel is in Malaysia, the door sill covers the whole lower door, and I am trying to look for it but comments on the video are not replying, hoping you guys could share some light on this since I haven't seen full door sill protectors, Thanks.

frp.webp


frp2.webp


frp3.webp
Sponsored

 

Jalbano2

Well-Known Member
First Name
J
Joined
Sep 21, 2024
Threads
5
Messages
101
Reaction score
95
Location
NYC
Vehicle(s)
Maverick Lariat Lux
Scrolling thru Youtube found this.
Channel is in Malaysia, the door sill covers the whole lower door, and I am trying to look for it but comments on the video are not replying, hoping you guys could share some light on this since I haven't seen full door sill protectors, Thanks.

frp.jpg


frp2.jpg


frp3.jpg
It looks like bed liner
 

John B

Well-Known Member
First Name
John
Joined
Jul 12, 2023
Threads
4
Messages
139
Reaction score
121
Location
Kansas City, Missouri
Vehicle(s)
2024 ford ranger raptor
Occupation
retired engineer
I found out the hard way that the sill plate, although it looks good, is not very sturdy at all (like walking on your hood fragile). I put a small dent in the edge (where of course I see it every time I get into and out of my ranger), and the repair estimate was $500 and most likely another $100 for a Ford Performance metal plate (very thin and really you can't remove without damage per shop, and my own experience). Because this is my daily and not a show vehicle, I decided to remove the plates and install a set of WeatherTech sill protectors for $70. Saved me from $600 repair plus likely future damage. Matches well with existing flooring, etc. Attached are order # and photos from someone else's post. Although the weathertech site says these won't fit the ranger raptor, they fit perfectly after plate removal

SmartSelect_20241031_104631_Gallery.jpg


SmartSelect_20241031_092109_Gallery.webp
 

Sponsored

hand-filer

Well-Known Member
First Name
Fred
Joined
May 16, 2024
Threads
10
Messages
631
Reaction score
1,013
Location
Manitoba, Canada
Vehicle(s)
2024 Ranger Lariat FX4
I found out the hard way that the sill plate, although it looks good, is not very sturdy at all (like walking on your hood fragile). I put a small dent in the edge (where of course I see it every time I get into and out of my ranger), and the repair estimate was $500 and most likely another $100 for a Ford Performance metal plate (very thin and really you can't remove without damage per shop, and my own experience). Because this is my daily and not a show vehicle, I decided to remove the plates and install a set of WeatherTech sill protectors for $70. Saved me from $600 repair plus likely future damage. Matches well with existing flooring, etc. Attached are order # and photos from someone else's post. Although the weathertech site says these won't fit the ranger raptor, they fit perfectly after plate removal

SmartSelect_20241031_104631_Gallery.jpg


SmartSelect_20241031_092109_Gallery.jpg
I like the coverage. However I don't like that they break the contact with the sealing surface in 8 locations (each end of each sill protector). Have you noticed any additional road noise on account of that?
 

John B

Well-Known Member
First Name
John
Joined
Jul 12, 2023
Threads
4
Messages
139
Reaction score
121
Location
Kansas City, Missouri
Vehicle(s)
2024 ford ranger raptor
Occupation
retired engineer
I like the coverage. However I don't like that they break the contact with the sealing surface in 8 locations (each end of each sill protector). Have you noticed any additional road noise on account of that?
No additional noise that I've detected. Although the bottom part of outer door seal does contact the vertical edge of the sill protector, the inner door seal remains untouched
 

Sponsored
OP
OP

2024raptor

Member
Joined
Jun 28, 2024
Threads
2
Messages
9
Reaction score
2
Location
Philippines
Vehicle(s)
Ranger Raptor
I found out the hard way that the sill plate, although it looks good, is not very sturdy at all (like walking on your hood fragile). I put a small dent in the edge (where of course I see it every time I get into and out of my ranger), and the repair estimate was $500 and most likely another $100 for a Ford Performance metal plate (very thin and really you can't remove without damage per shop, and my own experience). Because this is my daily and not a show vehicle, I decided to remove the plates and install a set of WeatherTech sill protectors for $70. Saved me from $600 repair plus likely future damage. Matches well with existing flooring, etc. Attached are order # and photos from someone else's post. Although the weathertech site says these won't fit the ranger raptor, they fit perfectly after plate removal

SmartSelect_20241031_104631_Gallery.jpg


SmartSelect_20241031_092109_Gallery.jpg
I'm installing sill plates for paint protection, sometimes your shoe gets caught on the sill and it peels some paint off.
 

budmancan

Member
Joined
Nov 12, 2024
Threads
3
Messages
15
Reaction score
4
Location
GOODWOOD, ONTARIO
Vehicle(s)
2024 Ranger Raptor
Does anybody have the ford part number for the “Ford Performance“ original parts? I can’t seem to find it online and the only number my Ford dealership can find find are the ones with “Ranger” on it.
Thank you in advance.
 

budmancan

Member
Joined
Nov 12, 2024
Threads
3
Messages
15
Reaction score
4
Location
GOODWOOD, ONTARIO
Vehicle(s)
2024 Ranger Raptor
Thank you, wish there was a service that I could combine multiple items I want from Au and save on the shipping costs. Each item is 100 to ship To canada.
Sponsored

 
 







Top