Oil pressure

[Gt350bill]

Has anybody checked their oil pressure on ranger raptor at gages

Sponsored

 

[Dipstick]

Has anybody checked their oil pressure on ranger raptor at gages

Yep. My gauge reads about 1/4 at idle and about 1/2 at 4000 rpm

 

[Bonus Oz]

As you all know the oil pressure gauge is just a guide and does not state any pressure .
I run an oil pressure gauge as I am in the middle of tuning my Raptor and as a guide the lower quarter mark on the gauge is 20 psi , half way mark is around 45 psi and three quarters is 72 psi .
Thats running stock Ford oil on a standard 3.0 ecoboost variable output oil pump .
Changing the viscosity of the oil will see different readings to this but this is just my personal readings

 

[Dipstick]

Has anybody checked their oil pressure on ranger raptor at gages

You can configure “My Gauges” and see the actual oil pressure psi.

 

[Rare Raptor]

Yep. My gauge reads about 1/4 at idle and about 1/2 at 4000 rpm

Mine is the same as above. I was alarmed that it read low at idle. Thanks for posting this.

 

[Rare Raptor]

You can configure “My Gauges” and see the actual oil pressure psi.

Where on the menu can you re config guages?

 

[Gt350bill]

Check your pressure on digital gauge on dash. At idle in drive. And driving at normal speeds

 

[452Ranger]

Where on the menu can you re config guages?

Check the owners manual starting on page 132. This explains how to configure the guages. Hope this helps.

 

[Gt350bill]

any ranger raptor owners checked the oil pressure on the digital guage

 

[jrRaptor]

any ranger raptor owners checked the oil pressure on the digital guage

 

[Dlowe198]

Nice I have the exact same readings that makes me feel better

 

[SubaruRaptor]

As you all know the oil pressure gauge is just a guide and does not state any pressure .
I run an oil pressure gauge as I am in the middle of tuning my Raptor and as a guide the lower quarter mark on the gauge is 20 psi , half way mark is around 45 psi and three quarters is 72 psi .
Thats running stock Ford oil on a standard 3.0 ecoboost variable output oil pump .
Changing the viscosity of the oil will see different readings to this but this is just my personal readings

That is absolutely normal as well and well within spec. I have a modified Subaru STI, and it runs the exact same with a bigger turbo and enhance oil pickup. Closer to 80 is probably where you want long term, but that is the correct ball park.

 

[bubba Dave]

You can configure “My Gauges” and see the actual oil pressure psi.

How did you configure your oil pressure gauge to show the actual pressure?

 

[Dipstick]

Use the 2 keys circled in red to configure MyGuages

 

[Dipstick]

How did you configure your oil pressure gauge to show the actual pressure?

See new post.

Sponsored