5G Ranger Tonneau Cover Fitment on 2024+ Ranger?

[NEPA]

Has anyone confirmed if a 5G tonneau cover will fit the new trucks? I’ve seen yes and no so far. Just wondering if anyone got to actually try it. Thanks

Sponsored

 

[Bt_okst]

They do not. Every cover I've looked at specifies that it's a 24 not a 23 and whether or not it's a raptor.

Bed dimensions are not the same.

 

[c5ken]

Question regarding the Autosaver88 tonneau cover.

Anyone have one? Does it fit a 2024 Ranger? The company states it will fit a 2021-2024. Not sure this is true.
Any Help??

 

[DirtDerrick]

Has anyone confirmed if a 5G tonneau cover will fit the new trucks? I’ve seen yes and no so far. Just wondering if anyone got to actually try it. Thanks

The Rough Country, Ford/Leer hard trifold does fit. I had ordered a new one and also had one from a 19-23 model, they both fit. I had to add a little more foam to the front gap between cover and top of bed. Sorry for bad pic.

 

[chasvs]

I'm hoping to reuse my Roll-n-Lock metal roller Tonnequ cover from my 2015 Lariat 5ft1in bed on my 2024 Lariat oncd the 2.7cuin V6 TT are avialable.

 

[Bt_okst]

Seems to depend on the brand and series of cover as to whether or not it can be modified to fit.

I'm just starting anew to be sure I have no fitment issues.

 

[danmoochie]

The Rough Country, Ford/Leer hard trifold does fit. I had ordered a new one and also had one from a 19-23 model, they both fit. I had to add a little more foam to the front gap between cover and top of bed. Sorry for bad pic.

is the Ford Leer have 3 or 4 panels? the site shows 4 smaler ones?

 

[DirtDerrick]

is the Ford Leer have 3 or 4 panels? the site shows 4 smaler ones?

Mine has 3 as seen in picture. Thank you.

 

[danmoochie]

is that your older one or the new one you purchased, and it looks to be high gloss, not matt finish, correct? I would like a matt finish!!!

 

[danmoochie]

this was what the leer looks like on Ford site? 4 panels and matt?

 

[galion]

5G Bakflip MX4

 

[Peter949]

5G Bakflip MX4

Awesome to see. Going to reuse my F1 Bakflip when I get my RR.

 

[Nate]

I tried a rollup that claimed to fit a 2024 ranger. It was about a 1/2 - 1 inch too narrow to the point the outside edges were tilted up vs laying flat against the top for a good seal

 

[Sportsman70004]

I have my tonneau cover from the 2023 model that i'm gonna install on the 24 model. Bed measures the same where it mounts so i will let everyone know.. It's the retractable model.

 

[Sportsman70004]

Installed my 23 model cover onto the 24 and it works but seems that the cover is longer on the 24 model and lid shuts and hits tailgate 1/4" before lid is shut thw whole way.

Sponsored