6th Gen XLT Bed Rack Options

[Sauce]

I was looking at the BAK Revolver X4ts Roll up cover with the t-slots and on the real truck website they have the elevate racks that work with it but for some reason do not fit the ranger raptor. No help from customer service, just 'it doesn't fit'. the only thing I can assume is the bars are too wide because obviously the towers fit with the cover.

Yea, they told me the same thing - which I'm not sure is accurate. But I CAN buy replacement T slot rails for $400 and reuse my tonneau. There is also the Yakima T rail option. Has anyone installed that option on the X4S T slot rails?

Sponsored

 

[engus13]

I was looking at the BAK Revolver X4ts Roll up cover with the t-slots and on the real truck website they have the elevate racks that work with it but for some reason do not fit the ranger raptor. No help from customer service, just 'it doesn't fit'. the only thing I can assume is the bars are too wide because obviously the towers fit with the cover.

If the Elevate rack fits the BAK Revolver X4ts and then the rack will fit the truck. When I bought my rack it was not confirmed to fit the 2024 Ranger, however, it does fit. It shows it fits the 2023 Ranger, and there is no difference in size of the bed between the two trucks. Also, I don't beleive there is any difference between the Lariat and Raptor beds.

 

[superj]

if you just want something to carry a box up high, don't forget about these from harbor freight. i have a set in the garage that i use on my 04 ranger but i am sure it will fit onto the 6th gen ranger because its so adjustable.

i am going to set mine up for my 24 ranger someday when i get off my butt and actually do it.

https://www.harborfreight.com/800-lb-universal-aluminum-truck-rack-57208.html

 

[OxygenMask]

if you just want something to carry a box up high, don't forget about these from harbor freight. i have a set in the garage that i use on my 04 ranger but i am sure it will fit onto the 6th gen ranger because its so adjustable.

i am going to set mine up for my 24 ranger someday when i get off my butt and actually do it.

https://www.harborfreight.com/800-lb-universal-aluminum-truck-rack-57208.html

I'm thinking about buying the Harbor freight rack, for kayak hauling.
Have you tried yours on your 6g yet? Wondering if the clamps will work ok with the bed rails. Also the cross bars can't be more than 3 1/4" wide for my carriers to clamp on.

 

[superj]

I'm thinking about buying the Harbor freight rack, for kayak hauling.
Have you tried yours on your 6g yet? Wondering if the clamps will work ok with the bed rails. Also the cross bars can't be more than 3 1/4" wide for my carriers to clamp on.

Yes, i mounted it. If I remember, the clamps worked fine but I had to undo the bolt fully and hold the two pieces in place while threading the bolt since the side lip was larger then on my 04.

Sponsored