Looks good! I'll let you know as soon as it arrives...Ready to send out! @freakshow999
It'll ship today.
If this is verified to fit, I'll get this option added to the product page immediately.
Ok so the cutouts were perfect they are the same as OEM. However I own this truck which means inherently I will have strange issues. My problem now is the plate from AAL is too thick by maybe 1mm! Seriously I put my calipers on them 1mm! And, I don't know the best way to go about fixing it. I looked at shaving down the clips like someone else already did, but it doesn't look like that will fix it. Plus if I were to shave them down too far it may end up being loose fitting & I don't want that either. As you can see in the picture it's right at the bend in the clip where it ends up if it were 1mm-2mm thinner I think it would snap right in like it does on the OEM mount. I suppose I could attempt to carefully sand the plate down. Maybe I'll try that on my original plate I already messed with. Sorry thinking about solutions while I'm typing...
We'll send you one that's 1mm thinner.Ok so the cutouts were perfect they are the same as OEM. However I own this truck which means inherently I will have strange issues. My problem now is the plate from AAL is too thick by maybe 1mm! Seriously I put my calipers on them 1mm! And, I don't know the best way to go about fixing it. I looked at shaving down the clips like someone else already did, but it doesn't look like that will fix it. Plus if I were to shave them down too far it may end up being loose fitting & I don't want that either. As you can see in the picture it's right at the bend in the clip where it ends up if it were 1mm-2mm thinner I think it would snap right in like it does on the OEM mount. I suppose I could attempt to carefully sand the plate down. Maybe I'll try that on my original plate I already messed with. Sorry thinking about solutions while I'm typing...
Any thoughts on how to approach solving this I'm all ears!
I am going to need one of those too. I have been unable to complete my installation. I will buy the replacement plate, I just don't want to buy a complete kit.
Absolutely, we are still making some final adjustments but go ahead and send over a email to our customer service and we can get you taken care of!
