Sponsored

ARB Summit MKII? (USA spec)

Baldwin1992

New Member
First Name
Alexander
Joined
Oct 6, 2026
Threads
1
Messages
1
Reaction score
2
Location
Nashville, TN
Vehicle(s)
2024 Ford Ranger XLT
I’m sorry to beat a dead horse.

Upgraded to 2025 Ford Ranger XLT following my 2019 Ford Ranger build. I fell in love with the ARB Summit Bumper for 5th gen rangers. However, after market support has been limited for 6th gen rangers.

I just got word from ARB USA that the ARB Summit MKII (6th gen Rangers) is coming January/February.

Anyone hearing similar news?

Ford Ranger ARB Summit MKII? (USA spec) IMG_0201
Sponsored

 

ADVNTURR

Well-Known Member
Joined
Sep 6, 2024
Threads
15
Messages
209
Reaction score
443
Location
Cleveland, OH
Vehicle(s)
'24 Ranger XLT 2.7L, '16 VW Golf R, '11 Nissan GT-R, '05 Nissan 350Z
I'll believe it when I see it. We've been told "it's coming in a couple months" several times now. This is an improvement over the last word from ARB that we were basically SOL I guess. Having now installed a Dobinson 4x4 Australian market bull bar on my US '24 XLT I sure hope that if ARB does bring any of their bumpers here they are properly designed for our trucks because they are surprisingly different than the Aussie/ROW trucks.
Ford Ranger ARB Summit MKII? (USA spec) PXL_20260726_170701418
 
Last edited:

aros_769

Active Member
Joined
Aug 14, 2024
Threads
4
Messages
44
Reaction score
95
Location
Vancouver, BC
Vehicle(s)
2003 LR Defender 90, 2018 BMW 328d, 2021 Bolt EV
I'll believe it when I see it. We've been told "it's coming in a couple months" several times now. This is an improvement over the last word from ARB thought that we were basically SOL I guess. Having now installed a Dobinson 4x4 Australian market bull bar on my US '24 XLT I sure hope that if ARB does bring any of their bumpers here they are properly designed for our trucks because they are surprisingly different than the Aussie/ROW trucks.
This is the problem. A lot of the manufacturers, Ironman, Dobinsons, ARB rushed into announcing products for the 6th Gen US Ranger thinking it would be interchangeable only to find the differences beneath the skin are considerable. I know theres a fair few bumpers sitting in a warehouse because of this. They’ve had to totally re-engineer them. Throw in the fact the last couple of years we’ve had Toyota release Land Cruiser, new Tacoma etc which are much bigger $$$ makers for the aftermarket than the Ranger, this is why we are where we are.
 

alrashid2

Well-Known Member
Joined
May 4, 2026
Threads
66
Messages
606
Reaction score
431
Location
PA
Vehicle(s)
2026 Ford Ranger XLT (2.7L V6)
I'll believe it when I see it. We've been told "it's coming in a couple months" several times now. This is an improvement over the last word from ARB that we were basically SOL I guess. Having now installed a Dobinson 4x4 Australian market bull bar on my US '24 XLT I sure hope that if ARB does bring any of their bumpers here they are properly designed for our trucks because they are surprisingly different than the Aussie/ROW trucks.
PXL_20260726_170701418.webp
Whoa, howd you score that! Looks great
 

Sponsored

ADVNTURR

Well-Known Member
Joined
Sep 6, 2024
Threads
15
Messages
209
Reaction score
443
Location
Cleveland, OH
Vehicle(s)
'24 Ranger XLT 2.7L, '16 VW Golf R, '11 Nissan GT-R, '05 Nissan 350Z
You've got this in Cleveland? Where you driving at around here to use it?
Yes I'm in the Cleveland area.

As far as usage, there is Southington Off-Road Park (which I used to go to in my Jeep) but honestly I don't have any real intent to take my truck there. I spend time in rural areas of NY, VA, WV where there's higher chances of finding Bambi. I do some auto racing and end up at some tracks that have unpaved paddock areas and have seen some truck/trailer setups get stuck (will eventually add a winch so I can help myself or others). And frankly, I like the look of a bull bar and it's my truck 🤷‍♂️
 

ADVNTURR

Well-Known Member
Joined
Sep 6, 2024
Threads
15
Messages
209
Reaction score
443
Location
Cleveland, OH
Vehicle(s)
'24 Ranger XLT 2.7L, '16 VW Golf R, '11 Nissan GT-R, '05 Nissan 350Z
Whoa, howd you score that! Looks great
I got it directly through Dobinson USA. I provided them with fairly detailed feedback on all the modifications I had to make to both my truck and their mounts to make it fit; not sure what they are doing with that information. I actually did plan to do a write-up for here and I am very delinquent in doing that, but life has deemed it a lower priority at the moment.

There are a few other people who have this bar installed in the US (maybe 2-4) that I'm aware of and in brief conversations they all experienced similar levels of challenge (although a base truck without the radar/camera/parking sensors would definitely save some effort).
 

HighDesertRanger

Well-Known Member
First Name
Matt
Joined
Jul 2, 2023
Threads
0
Messages
1,025
Reaction score
1,240
Location
Oklahoma
Vehicle(s)
Ford Fusion 2.7
Occupation
Sales Manager
This is the problem. A lot of the manufacturers, Ironman, Dobinsons, ARB rushed into announcing products for the 6th Gen US Ranger thinking it would be interchangeable only to find the differences beneath the skin are considerable. I know theres a fair few bumpers sitting in a warehouse because of this. They’ve had to totally re-engineer them. Throw in the fact the last couple of years we’ve had Toyota release Land Cruiser, new Tacoma etc which are much bigger $$$ makers for the aftermarket than the Ranger, this is why we are where we are.
It's frankly a crying shame that Ford changed the US truck so much from the ROW version. I'm sure there were reasons, but dang Ford. 🤦‍♂️
 

ADVNTURR

Well-Known Member
Joined
Sep 6, 2024
Threads
15
Messages
209
Reaction score
443
Location
Cleveland, OH
Vehicle(s)
'24 Ranger XLT 2.7L, '16 VW Golf R, '11 Nissan GT-R, '05 Nissan 350Z
It's frankly a crying shame that Ford changed the US truck so much from the ROW version. I'm sure there were reasons, but dang Ford. 🤦‍♂️
As someone who works in the vehicle assembly space, it never ceases to amaze me at the lack of design efficiency in the auto industry. I've seen a new design come out for the same basic application (transmission to x-member) that used a different torque spec, with a different sized head, at a 10mm wider spacing...but the same thread size. And both of these applications were being run down the same assembly line at the same time. Turned a simple tooling fixture into a complicated and much more expensive one for no reason.

Obviously there are some additional crash structures in the US (wouldn't dare add those additional structures to ROW trucks because it would cost more :rolleyes:). That known, the level of differences really surprised me. The front crossmember is entirely difference, to the point that the ends of the frame horn are not the same shape and don't have the same bolt pattern. Our tow hooks are a different bolt pattern and tucked higher up to the frame. There is a cross-hole in the frame that is not in the same place on both sides of the truck. We have the marker lights in the fender that aren't used anywhere else. The bracket for the radar is different. The wiring harness for the parking sensors appears to be different (I had to lengthen 1 of them which wasn't called for in the instructions). And that's just the high level stuff.
 

alrashid2

Well-Known Member
Joined
May 4, 2026
Threads
66
Messages
606
Reaction score
431
Location
PA
Vehicle(s)
2026 Ford Ranger XLT (2.7L V6)
I got it directly through Dobinson USA. I provided them with fairly detailed feedback on all the modifications I had to make to both my truck and their mounts to make it fit; not sure what they are doing with that information. I actually did plan to do a write-up for here and I am very delinquent in doing that, but life has deemed it a lower priority at the moment.

There are a few other people who have this bar installed in the US (maybe 2-4) that I'm aware of and in brief conversations they all experienced similar levels of challenge (although a base truck without the radar/camera/parking sensors would definitely save some effort).
You are The Ranger6g Influencer man haha. Thank you for all your experimentation, videos, and posts!
 
 







Top