Drive Modes mod via Forscan

[Mooncat747]

Sure thing... here's my original pic showing the only 3 options available horizontally. If one of these is disabled (using FORScan), then a different mode shows up, but never Eco mode. Though I was able to get Slippery, Normal and Sport modes to show after last FORScan adjustment, but that is the only change from the pic shown.

Do you have ECO enabled here in the APIM Module and ABS module? Check my screen. *Note. On my friends RR he has ECO disabled on the APIM Module. Same style menu as you. On mine I have to have it enabled. Don't forget to reboot the modules after saving changes.

Sponsored

 

[sweeks888]

Do you have ECO enabled here in the APIM Module and ABS module? Check my screen. *Note. On my friends RR he has ECO disabled on the APIM Module. Same style menu as you. On mine I have to have it enabled. Don't forget to reboot the modules after saving changes.

Yes, already did these things to start with, followed to the letter (all Eco enabled, selectable drive modes enabled, 760-04-05 xxxx-01xx-xxxx changed to 01, rebooted both modules)... was still no bueno.

 

[Mooncat747]

Yes, already did these things to start with, followed to the letter (all Eco enabled, selectable drive modes enabled, 760-04-05 xxxx-01xx-xxxx changed to 01, rebooted both modules)... was still no bueno.

Ok. I have an appointment this morning with Dr Ford to have the new keypad installed. I'll show him your screenshot and ask him how to get the eco mode option on there like my friend's RR. Will let you know asap.

 

[sweeks888]

Ok. I have an appointment this morning with Dr Ford to have the new keypad installed. I'll show him your screenshot and ask him how to get the eco mode option on there like my friend's RR. Will let you know asap.

Thank you MoonCat...

 

[Mooncat747]

Thank you MoonCat...

Ok go to ABS AS Build module and find
760-04-03 Change to this:
xxxx-xxx3-ABxx. Save changes. Maybe reboot the module too.

 

[sweeks888]

Ok go to ABS AS Build module and find
760-04-03 Change to this:
xxxx-xxx3-ABxx. Save changes. Maybe reboot the module too.

Ok, I'm on it... I'll report back when completed this morning sometime. Thanks Mooncat, appreciate the extra effort sir.

 

[sweeks888]

Ok go to ABS AS Build module and find
760-04-03 Change to this:
xxxx-xxx3-ABxx. Save changes. Maybe reboot the module too.

Well, we took a stab brother... but no bueno again. Screen stayed exactly the same (including module reboot). Also note, that coming from a 30 year background in computer repair/building and being a perfectionist in my work... I have no issues following directions to a "T". Gotta be something else we've missed or not been made aware of. I'll keep watching this post and others on 6G. Perhaps someone will solve this dilemma and list it for US Raptors as some point in the future.

As well and may make no difference, these FORScan codes seem to be different to start with on many other changes I have seen. Mine started out with a 203 (2nd box) already. My 3rd box started at 2B9E, then when changed to AB... the next 2 place holders changed to something other than 1F. Not sure if that would make a difference or not, didn't try changing to AB1F, as was not instructed to.

Sponsored