Sponsored

Experienced off-roader with New RR

pitvpr

New Member
First Name
Tony
Joined
Nov 17, 2026
Threads
1
Messages
1
Reaction score
1
Location
Arizona
Vehicle(s)
2026 Ranger Raptor
Hello

I'm new to these forums and the RR.
My previous truck was a Gen1 Raptor with a performance tune on 37” tires( perched up) .
I'm in Arizona so the offroad community is very strong here, and we have abundant trails both Baja style and crawling.

I’ve had my RR for 2 months (just hit 1500 miles) and I’ve jumped her 3 times and offloaded probably 5 times.

I will eventually go to 35” tires and an ADD Front bumper (had aftermarket front and rear on my Gen1).

My local offroad shop (these guys race offroad and have ton’s of experience) suggested I go with the Eibach 2.3” up front and the 1.0” in the rear, possibly billet top hats too. They recommended the 2.3 to slightly offset the weight of the bumper / lights.

I know there is a TON of information out there regarding this topic and the infamous GOAT offroad 2”/1” strut spacer and why it’s the MUST got to.

However my offroad shop “experts” adamantly insist that I would be putting too much stress on the front suspension components and I would regret doing the strut spacers over time.

Keep in mind we do offroad, and this is not just for looks.
Looking for some confirmation and input on this…
Sponsored

 

Bloody run

Well-Known Member
First Name
David
Joined
Mar 6, 2026
Threads
8
Messages
69
Reaction score
50
Location
Clearfield pa.
Vehicle(s)
2025 Blue Ranger Raptor
Occupation
Retired Harley Davidson Toolmaker
Hello

I'm new to these forums and the RR.
My previous truck was a Gen1 Raptor with a performance tune on 37” tires( perched up) .
I'm in Arizona so the offroad community is very strong here, and we have abundant trails both Baja style and crawling.

I’ve had my RR for 2 months (just hit 1500 miles) and I’ve jumped her 3 times and offloaded probably 5 times.

I will eventually go to 35” tires and an ADD Front bumper (had aftermarket front and rear on my Gen1).

My local offroad shop (these guys race offroad and have ton’s of experience) suggested I go with the Eibach 2.3” up front and the 1.0” in the rear, possibly billet top hats too. They recommended the 2.3 to slightly offset the weight of the bumper / lights.

I know there is a TON of information out there regarding this topic and the infamous GOAT offroad 2”/1” strut spacer and why it’s the MUST got to.

However my offroad shop “experts” adamantly insist that I would be putting too much stress on the front suspension components and I would regret doing the strut spacers over time.

Keep in mind we do offroad, and this is not just for looks.
Looking for some confirmation and input on this…
"A TON of "
Sponsored

 
 







Top